Finished Ascension Cross - Scroll Saw Woodworking & Crafts Message Board

mt10425 · 10-18-2009, 10:20 PM

Thank you to everyone for the advice on finishing the cross. I used Danish oil for both the front and back. Natural for the back and mahogany for the cross itself.

Enjoy!

Eddi

marshall · 10-19-2009, 12:01 AM

Pretty work Eddi

, I'm placing an order tomorrow for some 1/4 " Mahogany > some pretty material to work with for sure............Marshall

KtownScroller · 10-19-2009, 12:47 AM

Very nice Eddi!

Haggard3230 · 10-19-2009, 12:50 AM

Very nice cutting Eddi.

scrollpup · 10-19-2009, 01:43 AM

Turned out great Eddi! Way to go!

Jerry

mt10425 · 10-19-2009, 02:44 AM

Thanks everyone. It turned out much better than I had hoped for. Eddi

Wood Dog · 10-19-2009, 03:33 AM

Well done, Eddi. It looks great. About how long did that project take to cut?

mt10425 · 10-19-2009, 02:04 PM

WD - it took about 30 hours of cutting over 2 months. I took it very slowly to try and make sure that I didn't mess it up. If I started to get frustrated I just walked away for a day or so. I wasn't in any hurry to finish it so that plan worked out for me.

rjr · 10-19-2009, 04:37 PM

Eddi
Great job on the cutting, turned out great, I like to color contrast.

Jazziedog · 10-20-2009, 12:18 AM

Very beautiful. Great job.

10-19-2009, 12:01 AM	#2
marshall Just love Being Here Join Date: May 2008 Location: Jonesboro AR Posts: 2,113	Pretty work Eddi , I'm placing an order tomorrow for some 1/4 " Mahogany > some pretty material to work with for sure............Marshall __________________ Usually busier than a cat in a sandbox !!!!!!!!!!! { Dewalt 788 only }

10-19-2009, 12:47 AM	#3
KtownScroller So much better :) Join Date: Nov 2008 Location: PA Posts: 2,665	Very nice Eddi! __________________ - Rick

10-19-2009, 12:50 AM	#4
Haggard3230 Senior Member Join Date: Mar 2007 Location: Riverton, KS on Route 66 Posts: 2,714	Very nice cutting Eddi. __________________ Merle SSG US Army Retired. merlehobbs@yahoo.com

10-19-2009, 01:43 AM	#5
scrollpup Avatar by Casey Join Date: Jan 2009 Location: Hot Springs,Arkansas Posts: 1,732	Turned out great Eddi! Way to go! Jerry __________________ Two wrongs don't make a right....they just even the score...

10-19-2009, 03:33 AM	#7
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,451	Well done, Eddi. It looks great. About how long did that project take to cut? __________________ WD

10-19-2009, 02:44 AM	#6
mt10425 Junior Member Join Date: Jan 2009 Posts: 23	Thanks everyone. It turned out much better than I had hoped for. Eddi

10-19-2009, 02:04 PM	#8
mt10425 Junior Member Join Date: Jan 2009 Posts: 23	WD - it took about 30 hours of cutting over 2 months. I took it very slowly to try and make sure that I didn't mess it up. If I started to get frustrated I just walked away for a day or so. I wasn't in any hurry to finish it so that plan worked out for me.

10-19-2009, 04:37 PM	#9
rjr Support Our Troops Join Date: Nov 2008 Location: Minnesota Posts: 344	Eddi Great job on the cutting, turned out great, I like to color contrast. __________________ Ron

10-20-2009, 12:18 AM	#10
Jazziedog Member Join Date: Sep 2008 Location: Connecticut, USA Posts: 54	Very beautiful. Great job. __________________ Joan

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode