Scrollsaw Table

[aceofspades0990]

Thanks i got the plans in the email thanks for sending

[Gypsum]

I finally finished the scroll saw stand from the plans that Leo furnished. I had to make some modifications to the dimensions as they were too small for me or my saw. I also used a variation of Saw Dust John's device to provide mobility for the stand. Since neither I nor the saw are going on walkabout, I could get by with casters rather than wheels from the original plan to move the saw so I can sweep the area around it.
I was somewhat concerned that the table might be prone to vibration as it is fairly light weight but that did not occur. I will be building a second table for another saw. My thanks to Leo and Saw Dust John for solving my SS stand problem.

[maurvz800@aol.com]

Hi Leo,I too would love a copy of your measured drawing..mine in inches please...you could always confuse us and put some of each on drawing...lol -Andy Maurvz800@aol.com

[leo cross]

Hi from AUSTRALIA, Attached are the drawings for the table. Merry christmas and a happy new year. Please email me if you dont recieve the attachments. Leo Cross.