new to scrolling - Scroll Saw Woodworking & Crafts Message Board

cbingham · 08-25-2011, 02:57 AM

Hi
My name is Clive. I am from Taumarunui, New Zealand. I have just started scrollsawing, although I have been working with wood for a lot of years. When I saw some of the fantastic creations the rest of you have been producing I knew I just had to have a go. I have enjoyed viewing this scrollsaw websit and found it to be really helpful, answering a lot of those beginner questions and getting some really useful hints and tricks. So thankyou for being so open and helpful.

For those of you who do not know were Taumarunui is, it is located in the centre of the north Island of New Zealand, just west of Lake Taupo (trout fishing capital of NZ) and Just north of Mt Ruapehu. It is a great area for Tramping, kayaking, fishing and skiing. It is a traditional sheep and beef farming area given it is pritty hilly. The population of the town is about 2000 with another 1-2000 people on farms in the surounding area. We tend to be a friendly bunch of people so if anyone is passing this way feel free to drop by.

Clive

wood-n-things · 08-25-2011, 03:19 AM

Welcome A Board Clive!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions.

You may find the stickies at the top of this forum to be very helpful. Use the Link below.

Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board.

Take a few minutes to read through them. They are chock full of great information.

Be sure and share pics of your projects. We thrive on pictures.

The only dumb question is the one that remains unasked.

Whatever reason brought you to our forum we are pleased you found us.

ncsealeveler · 08-25-2011, 11:41 AM

Welcome to the crowd.Lots of good info and patterns here abouts for the searching.
Tony

Daddy's scroller · 08-28-2011, 02:20 AM

welcome aboard, glad you found us. feel free to ask questions

08-25-2011, 02:57 AM	#1
cbingham Junior Member Join Date: Aug 2011 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	new to scrolling Hi My name is Clive. I am from Taumarunui, New Zealand. I have just started scrollsawing, although I have been working with wood for a lot of years. When I saw some of the fantastic creations the rest of you have been producing I knew I just had to have a go. I have enjoyed viewing this scrollsaw websit and found it to be really helpful, answering a lot of those beginner questions and getting some really useful hints and tricks. So thankyou for being so open and helpful. For those of you who do not know were Taumarunui is, it is located in the centre of the north Island of New Zealand, just west of Lake Taupo (trout fishing capital of NZ) and Just north of Mt Ruapehu. It is a great area for Tramping, kayaking, fishing and skiing. It is a traditional sheep and beef farming area given it is pritty hilly. The population of the town is about 2000 with another 1-2000 people on farms in the surounding area. We tend to be a friendly bunch of people so if anyone is passing this way feel free to drop by. Clive

08-25-2011, 03:19 AM	#2
wood-n-things Staying Positive Join Date: Nov 2005 Location: Hamilton, Montana Posts: 18,561 Thanks: 50 Thanked 380 Times in 281 Posts	Welcome A Board Clive!! You will be hard pressed to find a friendlier or more knowledgeable group on the net re: woodworking. Share your knowledge and do not hesitate to ask questions. You may find the stickies at the top of this forum to be very helpful. Use the Link below. Message Board FAQ, Suggestions and Feedback - Scroll Saw Woodworking & Crafts Message Board. Take a few minutes to read through them. They are chock full of great information. Be sure and share pics of your projects. We thrive on pictures. The only dumb question is the one that remains unasked. Whatever reason brought you to our forum we are pleased you found us. __________________ "Montana MIKE" There is a very fine line between “hobby” and “mental illness.” As You Slide Down the Banister of Life, Pray That All The Splinters Are Pointed The Other Way... "Don't worry about old age--it doesn't last that long." Mike's Wood-n-Things

08-28-2011, 02:20 AM	#4
Daddy's scroller Senior Member Join Date: Aug 2010 Posts: 858 Thanks: 0 Thanked 3 Times in 3 Posts	welcome aboard, glad you found us. feel free to ask questions __________________ Tricia

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scrolling, scrolling, scrolling...RAWHIDE.	Don Stevens	Welcome Members	8	04-07-2012 01:36 PM
Not scrolling but still rather fun to do.	wood-n-things	Off Topic	17	12-09-2009 11:49 PM
Scrolling	tony zuck	Message Board FAQ, Suggestions and Feedback	5	12-06-2007 12:33 AM
Is Spiral Blade Scrolling....Really Scrolling?	Scroller Patroller	General Scroll Saw	7	02-07-2007 03:42 PM
up and scrolling again	Rob	Beginners Scroll Saw	2	01-31-2007 02:28 AM

08-25-2011, 11:41 AM	#3
ncsealeveler Senior Member Join Date: Nov 2008 Location: Sea Level NC Posts: 924 Thanks: 28 Thanked 0 Times in 0 Posts	Welcome to the crowd.Lots of good info and patterns here abouts for the searching. Tony