just saying hello - Scroll Saw Woodworking & Crafts Message Board

shawnc · 05-31-2009, 06:04 AM

Hi and hello to all. I am new to scrolling and the joy that comes with it. I started scroling about five or six months ago on and off and i have had lots of ups and downs but enjoy myself still. I welcome any and all tips hints patterns and advice anyone has to offer. Thanks

miniwoodworker · 05-31-2009, 09:00 AM

Hello right back at ya Shawn.

Jump right into the pool. Spend some time swimming around the threads and the reference materials on the left margin. Lots of good info. Then, feel free to raise your hand when you've got a question or would like to share a though or two. Naugh, hand raising isn't needed, just speak up! (smile)

We love pictures, every thing from beginner's first attemps to those jaw dropping masterpieces. So it doesn't matter where your skill level is, we'll enjoy seeing your work.

Burdez · 05-31-2009, 01:32 PM

Here is my big WECOME Shawn let us know what type of scrolling you like or would like to try and what type of saw you have or any questions you may have now or some where down the road and I know some of the very knowledgeable folks around here will help you out or at the very least point you in the right direction
Erssel

Wood Dog · 05-31-2009, 01:53 PM

Welcome to the forum Shawnc glad you joined the group. You can get some free patterns in the Pattern Vault here on the forum, also you can click on free scroll saw patterns under the Magazine heading on the right side. If you haven't already subscribed to the Scroll Saw Woodworking & Crafts magazine I would highly recommend it. Come by often and post some project pictures, we love the see what everyone is working on, and as Lee said it doesn't matter what level you are at......so don't be shy.

05-31-2009, 06:04 AM	#1
shawnc Junior Member Join Date: May 2009 Posts: 1	just saying hello Hi and hello to all. I am new to scrolling and the joy that comes with it. I started scroling about five or six months ago on and off and i have had lots of ups and downs but enjoy myself still. I welcome any and all tips hints patterns and advice anyone has to offer. Thanks

05-31-2009, 09:00 AM	#2
miniwoodworker Senior Member Join Date: May 2005 Posts: 496	Hello right back at ya Shawn. Jump right into the pool. Spend some time swimming around the threads and the reference materials on the left margin. Lots of good info. Then, feel free to raise your hand when you've got a question or would like to share a though or two. Naugh, hand raising isn't needed, just speak up! (smile) We love pictures, every thing from beginner's first attemps to those jaw dropping masterpieces. So it doesn't matter where your skill level is, we'll enjoy seeing your work. __________________ Lee in NC Als Ik Kan DW788 1975 Dremel (labeled Craftsman) Scroll saw w/3" pin blades

05-31-2009, 01:53 PM	#4
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,925	Welcome to the forum Shawnc glad you joined the group. You can get some free patterns in the Pattern Vault here on the forum, also you can click on free scroll saw patterns under the Magazine heading on the right side. If you haven't already subscribed to the Scroll Saw Woodworking & Crafts magazine I would highly recommend it. Come by often and post some project pictures, we love the see what everyone is working on, and as Lee said it doesn't matter what level you are at......so don't be shy. __________________ WD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-31-2009, 01:32 PM	#3
Burdez Senior Member Join Date: Nov 2008 Location: I'm an American living in San Miguel De Allende Mexico Posts: 1,164	Here is my big WECOME Shawn let us know what type of scrolling you like or would like to try and what type of saw you have or any questions you may have now or some where down the road and I know some of the very knowledgeable folks around here will help you out or at the very least point you in the right direction Erssel