New Member To This Message Board - Scroll Saw Woodworking & Crafts Message Board

WILD SCROLLER · 09-26-2007, 02:09 AM

I Am A New Member To This Message Board And Have Been Scrolling For The Past Six Months. I Have Worked On Several Projects And Have Been Reading As Much As I Can Find On The Internet Concerning Scroll Sawing. I Will Be Looking For Advice From You The More Experienced Scrollers As Time Goes On. At The Present Time I Have A Dewalt Dw788 Which I Love To Work With And From What I Have Been Reading It Appears To Be The Saw Of Choice. I Am Also Looking For A Good Source Of Quarter And One Half Inch By 4, 6 And 8 Inch Witdths. I Live In Minnesota So Any Information I Could Be Given Would Be Of Benefit. Hope To Be Hearing From Other Scrollers Out There In Cyberspace.

lucky788scroller · 09-26-2007, 02:22 AM

Welcome aboard. Heres a couple wood suppliers to try out... www.petersonscustomlumber.com and www.ocoochhardwoods.com or www.sloanswoodshop.com . Theres many out there, them three are all good reputable dealers with reasonable prices. Dale

lucky788scroller · 09-26-2007, 02:25 AM

Quote:

Originally Posted by WILD SCROLLER

I Live In Minnesota So Any Information I Could Be Given Would Be Of Benefit.

Root for the Packers, and forget about that purple team! Dale

Steviegwood · 09-26-2007, 08:50 AM

Welcome to the family WILD SCROLLER. Steve

Tor · 09-26-2007, 09:25 AM

Welcome.

Tor

thecopperfish · 09-26-2007, 04:06 PM

Welcome to the group, I know you will like it here.
Chris

WILD SCROLLER · 09-27-2007, 03:03 AM

Thanks For Welcoming To The Message Board. I Have Already Read A Lot Of Interesting Information On Blades, Using Clear Tape For Eliminating Wood Burning And Find The Comments Made By All Scrollers Very Interesting. I'm Going To Enjoy The Message Board. Also. Thanks For The Information On Where To Purchase Hardwood In Various Sizes.

workin for wood · 09-27-2007, 04:34 PM

Welcome to the board. There's no flying steel chairs allowed in here <wink>

greg194799 · 09-27-2007, 05:20 PM

welcome aboard, hope to see some of your work soon.

09-26-2007, 02:09 AM	#1
WILD SCROLLER Junior Member Join Date: Sep 2007 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	New Member To This Message Board I Am A New Member To This Message Board And Have Been Scrolling For The Past Six Months. I Have Worked On Several Projects And Have Been Reading As Much As I Can Find On The Internet Concerning Scroll Sawing. I Will Be Looking For Advice From You The More Experienced Scrollers As Time Goes On. At The Present Time I Have A Dewalt Dw788 Which I Love To Work With And From What I Have Been Reading It Appears To Be The Saw Of Choice. I Am Also Looking For A Good Source Of Quarter And One Half Inch By 4, 6 And 8 Inch Witdths. I Live In Minnesota So Any Information I Could Be Given Would Be Of Benefit. Hope To Be Hearing From Other Scrollers Out There In Cyberspace.

09-26-2007, 08:50 AM	#4
Steviegwood Senior Member Join Date: May 2006 Location: Arthur, WV Posts: 2,110 Thanks: 1 Thanked 5 Times in 5 Posts	Welcome to the family WILD SCROLLER. Steve __________________ If This HillBilly Can't Fix it Then it Ain't Broke!!! My Gallery steve03@frontiernet.net

09-26-2007, 09:25 AM	#5
Tor Mad Marqueteur Join Date: May 2007 Location: The "Green Side" in Hawaii Posts: 1,379 Thanks: 0 Thanked 0 Times in 0 Posts	Welcome. Tor __________________ I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it. - Thomas Jefferson Garden Island Marqueteur http://www.fineartmarquetry.com

09-26-2007, 04:06 PM	#6
thecopperfish Senior Member Join Date: Jan 2007 Location: Oregon USA Posts: 1,112 Thanks: 0 Thanked 0 Times in 0 Posts	Welcome to the group, I know you will like it here. Chris __________________ What! There's no coffee?!!

09-27-2007, 04:34 PM	#8
workin for wood Masterscroller.com™ Join Date: Aug 2006 Location: Eaton Rapids Michigan Posts: 2,370 Thanks: 0 Thanked 1 Time in 1 Post	Welcome to the board. There's no flying steel chairs allowed in here <wink> __________________ Jeff Powell

09-26-2007, 02:22 AM	#2
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,308 Thanks: 0 Thanked 0 Times in 0 Posts	Welcome aboard. Heres a couple wood suppliers to try out... www.petersonscustomlumber.com and www.ocoochhardwoods.com or www.sloanswoodshop.com . Theres many out there, them three are all good reputable dealers with reasonable prices. Dale

09-27-2007, 03:03 AM	#7
WILD SCROLLER Junior Member Join Date: Sep 2007 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks For Welcoming To The Message Board. I Have Already Read A Lot Of Interesting Information On Blades, Using Clear Tape For Eliminating Wood Burning And Find The Comments Made By All Scrollers Very Interesting. I'm Going To Enjoy The Message Board. Also. Thanks For The Information On Where To Purchase Hardwood In Various Sizes.

09-27-2007, 05:20 PM	#9
greg194799 Senior Member Join Date: Oct 2005 Location: Houston, Texas Posts: 175 Thanks: 0 Thanked 0 Times in 0 Posts	welcome aboard, hope to see some of your work soon. __________________ Greg H. In Houston

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
add to Message Board	Pajaro	Message Board FAQ, Suggestions and Feedback	3	09-29-2008 05:47 PM
Message board pins	BobD	Publisher Feedback	43	02-24-2008 07:30 PM
New to the message Board.	MetalEd	Welcome Members	6	01-19-2006 07:45 PM
One last question for the new message board	BobD	General Scroll Saw	10	12-10-2004 10:16 PM