Long Island Woodworking Show - Page 4 - Scroll Saw Woodworking & Crafts Message Board

sawdustjoe · 09-18-2009, 02:23 PM

Demos at the Show are free and there is no pre-registration necessary. Farmingdale, Plainview and Melville are the closest towns the Show. Hicksville is just a little further, but it is still close enough to make it a viable location. The Show is at exit 48 of the Long Island Expressway (interstate 495) and traffic should not be too bad on the days of the Show. Just go south bound on Round Swamp Road and look for the signs for Old Bethpage Restoration Village which will be on your left.

Rolf · 09-23-2009, 01:21 PM

Joe Thanks for the information

Carol,
Just had a glimpse of your book on Steve's Scrollsaw workshop site.
I am really looking forward to getting my hands on one, and of course to see you demonstrate your techniques.

Rolf · 10-13-2009, 01:17 PM

I am just bumping this up. We are still looking for vendors , not so easy in this economy.
If any of you know of any companies that would be interested let me know and I will refer them to the appropriate people.

Rolf · 10-21-2009, 01:39 PM

I hope this post isn't breaking any rules.
For those of you that are coming to our show Lakeshore Hard woods will be a vendor.
So if you need some special wood they will bring it to the show for you, saving you the shipping costs. Lakeshore Hardwoods Kiln Dried Hardwood

sawdustjoe · 11-06-2009, 12:32 PM

The Show is shaping up nicely. It starts a week from tomorrow, November 14. For more info and seminar schedule go to Long Island Woodworkers Club.

handibunny · 11-06-2009, 05:27 PM

I'll be doing 3 demos at the show, two on Saturday and one on Sunday. I will be hanging around at other times at my table, books and bowls at hand. And, I'll be bringing along some stuff that I haven't posted yet on the forum, that should be of special interest to lathe turners.

Hope to see you there!

sawdustjoe · 11-06-2009, 07:20 PM

Carole, looking forward to meeting you and seeing your seminar, bring plenty of books.

handibunny · 11-07-2009, 01:49 AM

I forgot the most important part. I'm bringing candy, too.

Rolf · 11-08-2009, 08:51 PM

Candy? I am not so sure that is such a good idea, Joe and I shouldn't really eat any or we wont be able to sit close to the saw anymore.

sawdustjoe · 11-09-2009, 12:10 PM

Rolf, speak for yourself, Carole I'll have the candy.

09-18-2009, 02:23 PM	#31
sawdustjoe Junior Member Join Date: Mar 2006 Location: Dix Hills, New York Posts: 20	Demos at the Show are free and there is no pre-registration necessary. Farmingdale, Plainview and Melville are the closest towns the Show. Hicksville is just a little further, but it is still close enough to make it a viable location. The Show is at exit 48 of the Long Island Expressway (interstate 495) and traffic should not be too bad on the days of the Show. Just go south bound on Round Swamp Road and look for the signs for Old Bethpage Restoration Village which will be on your left. __________________ Joe Pascucci Hegner "You can't put your arm in the same river twice!" Proud member of the Long Island Scrollsaw Association Last edited by sawdustjoe; 09-18-2009 at 03:40 PM.

09-23-2009, 01:21 PM	#32
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	Joe Thanks for the information Carol, Just had a glimpse of your book on Steve's Scrollsaw workshop site. I am really looking forward to getting my hands on one, and of course to see you demonstrate your techniques. __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

10-13-2009, 01:17 PM	#33
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	I am just bumping this up. We are still looking for vendors , not so easy in this economy. If any of you know of any companies that would be interested let me know and I will refer them to the appropriate people. __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

10-21-2009, 01:39 PM	#34
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	I hope this post isn't breaking any rules. For those of you that are coming to our show Lakeshore Hard woods will be a vendor. So if you need some special wood they will bring it to the show for you, saving you the shipping costs. Lakeshore Hardwoods Kiln Dried Hardwood __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

11-06-2009, 12:32 PM	#35
sawdustjoe Junior Member Join Date: Mar 2006 Location: Dix Hills, New York Posts: 20	The Show is shaping up nicely. It starts a week from tomorrow, November 14. For more info and seminar schedule go to Long Island Woodworkers Club. __________________ Joe Pascucci Hegner "You can't put your arm in the same river twice!" Proud member of the Long Island Scrollsaw Association

11-06-2009, 05:27 PM	#36
handibunny Senior Member Join Date: Aug 2006 Location: NY Posts: 359	I'll be doing 3 demos at the show, two on Saturday and one on Sunday. I will be hanging around at other times at my table, books and bowls at hand. And, I'll be bringing along some stuff that I haven't posted yet on the forum, that should be of special interest to lathe turners. Hope to see you there! __________________ Carole Follow me on my blog: www.scrollsawbowls.blogspot.com

11-06-2009, 07:20 PM	#37
sawdustjoe Junior Member Join Date: Mar 2006 Location: Dix Hills, New York Posts: 20	Carole, looking forward to meeting you and seeing your seminar, bring plenty of books. __________________ Joe Pascucci Hegner "You can't put your arm in the same river twice!" Proud member of the Long Island Scrollsaw Association

11-07-2009, 01:49 AM	#38
handibunny Senior Member Join Date: Aug 2006 Location: NY Posts: 359	I forgot the most important part. I'm bringing candy, too. __________________ Carole Follow me on my blog: www.scrollsawbowls.blogspot.com

11-08-2009, 08:51 PM	#39
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	Candy? I am not so sure that is such a good idea, Joe and I shouldn't really eat any or we wont be able to sit close to the saw anymore. __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

11-09-2009, 12:10 PM	#40
sawdustjoe Junior Member Join Date: Mar 2006 Location: Dix Hills, New York Posts: 20	Rolf, speak for yourself, Carole I'll have the candy. __________________ Joe Pascucci Hegner "You can't put your arm in the same river twice!" Proud member of the Long Island Scrollsaw Association

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode