Long Island Woodworking Show - Page 3 - Scroll Saw Woodworking & Crafts Message Board

will8989 · 09-14-2009, 02:27 AM

Thanks Carole! I guess that's where I"ll be making our reservations! Can't wait to meet you and learn about your baskets!!

Betty

handibunny · 09-14-2009, 03:25 AM

Glad you'll be there, Betty. Should be a lot of fun. I met Kevin today at the Apple Festival in CT, and it's really cool meeting people you've only known online.

Rolf · 09-16-2009, 12:48 PM

I need to Clarify that the admission to our show is free but there is a fee to get into Old Bethpage Restoration Village. That is where our event will be.

Ocelot · 09-16-2009, 02:44 PM

Quote:

Originally Posted by Rolf

I need to Clarify that the admission to our show is free but there is a fee to get into Old Bethpage Restoration Village. That is where or event will be.

Do you know what the fee is? I may go down there for one of your show days since I think it's a little less than a two hour drive.

Ray

will8989 · 09-16-2009, 04:50 PM

Are Carole's workshops, or whatever they are, free or do you have to preregister? I can only make it on Sunday, so I want to be sure I get in!! I am itching to get my hands on your book Carole! Can't you hurry up the release BobD?

Betty

handibunny · 09-16-2009, 10:17 PM

I just checked the Old Bethpage Village website, and it appears that admission is $10, $7 for seniors. I've never been to the restoration, but it looks like something worthwhile to visit in addition to the woodworking show. I've offered to do 2 demos on Saturday and one on Sunday, and have asked for a table so I can have a place to talk to people between demos. I'm also planning on bringing books, since I'm sure they will be available by then.

I'm assuming that the demos do not require any preregistration (Rolf or somebody correct me if I'm wrong), and I'll be around to answer any questions that don't get covered during the demos.

Rolf · 09-17-2009, 07:53 PM

That is a good question Carol I will ask at our meeting tonight. I have never gone to a presentation at one of our shows, so I am not sure how it works. I have always been too busy. I have only been a member of the club for about 5 years so alot of this stuff is new to me too.

Simplyme · 09-17-2009, 08:19 PM

Rofl,

I am looking forward to this event and was wondering if you guys could use any help in setting up everything? I might be able to volunteer my time. I can pretty much help with anything but teaching(LOL).

Just a thought.

Rolf · 09-17-2009, 09:55 PM

Simplyme,
Where do you live ?

Simplyme · 09-18-2009, 02:52 AM

Quote:

Originally Posted by Rolf

Simplyme,
Where do you live ?

I live in Queens New York

09-14-2009, 02:27 AM	#21
will8989 Senior Member Join Date: Mar 2004 Location: Glen Burnie, MD Posts: 1,204	Thanks Carole! I guess that's where I"ll be making our reservations! Can't wait to meet you and learn about your baskets!! Betty __________________ A woodworker never has too many clamps!!

09-14-2009, 03:25 AM	#22
handibunny Senior Member Join Date: Aug 2006 Location: NY Posts: 364	Glad you'll be there, Betty. Should be a lot of fun. I met Kevin today at the Apple Festival in CT, and it's really cool meeting people you've only known online. __________________ Carole Follow me on my blog: www.scrollsawbowls.blogspot.com

09-16-2009, 12:48 PM	#23
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	I need to Clarify that the admission to our show is free but there is a fee to get into Old Bethpage Restoration Village. That is where our event will be. __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can" Last edited by Rolf; 09-17-2009 at 07:55 PM.

09-16-2009, 04:50 PM	#25
will8989 Senior Member Join Date: Mar 2004 Location: Glen Burnie, MD Posts: 1,204	Are Carole's workshops, or whatever they are, free or do you have to preregister? I can only make it on Sunday, so I want to be sure I get in!! I am itching to get my hands on your book Carole! Can't you hurry up the release BobD? Betty __________________ A woodworker never has too many clamps!!

09-16-2009, 10:17 PM	#26
handibunny Senior Member Join Date: Aug 2006 Location: NY Posts: 364	I just checked the Old Bethpage Village website, and it appears that admission is $10, $7 for seniors. I've never been to the restoration, but it looks like something worthwhile to visit in addition to the woodworking show. I've offered to do 2 demos on Saturday and one on Sunday, and have asked for a table so I can have a place to talk to people between demos. I'm also planning on bringing books, since I'm sure they will be available by then. I'm assuming that the demos do not require any preregistration (Rolf or somebody correct me if I'm wrong), and I'll be around to answer any questions that don't get covered during the demos. __________________ Carole Follow me on my blog: www.scrollsawbowls.blogspot.com

09-17-2009, 07:53 PM	#27
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	That is a good question Carol I will ask at our meeting tonight. I have never gone to a presentation at one of our shows, so I am not sure how it works. I have always been too busy. I have only been a member of the club for about 5 years so alot of this stuff is new to me too. __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can" Last edited by Rolf; 09-17-2009 at 07:57 PM.

09-17-2009, 08:19 PM	#28
Simplyme Senior Member Join Date: Sep 2008 Posts: 182	Rofl, I am looking forward to this event and was wondering if you guys could use any help in setting up everything? I might be able to volunteer my time. I can pretty much help with anything but teaching(LOL). Just a thought.

09-17-2009, 09:55 PM	#29
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	Simplyme, Where do you live ? __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode