Practical dust collection system?

[Shawn Rogers]

I'm a new scroll sawyer....started about 10 days ago. I set up a place in my basement (unfinished basement, just clean, painted floor and walls) to work in. After practicing a little bit, and cutting some beginner type projects it's time to get serious about this hobby. SO...now we have to sand, and that makes a lot of dust. What do you folks do to prevent excess dust? I suppose a small dust collection system is in order..any suggesestions? Are the downdraft tabletop work surfaces woth the price? Any help would be appreciated.

[popsshop]

Hmmmmmmmmm, practical and cheap - - - - a good box fan in a window did the trick for me when I was a beginner. Exhaust the dust out the window.

[Minnesota scroller]

I also do my scrolling and routing and planing and sanding and drilling in my basement. I just let the sawdust fly and take the shop vac to it when the Mrs. starts whining.

[Gill]

Which saw did you choose, Shawn? Perhaps someone with a similar machine might be able to tell you how they address the problem.

Gill

[Shawn Rogers]

I have a dewalt 1800. I'm happy with it so far.

[QTOFFER]

Welcome Shawn!!!

I've been kicking around the idea of building my own downdraft table. They're supposedly great for flat sanding. Essentially, it's just a sealed wooden box of whatever dimensions you desire with a pegboard top and a fitting to attach to your shopvac. The key is to include an interior baffle to ensure even air flow through all areas of the pegboard. The baffle is a false bottom that slants toward the vacuum fitting.
Here are some sites that describe some inexpensive DIY downdraft sanding stations:

http://www.woodworkersworkshop.com/p...ding_table.htm
http://billpentz.com/woodworking/Downdraft.html
http://users.goldengate.net/%7Ekbrad...ollection.html

That last site has some neat ideas for hooking up the shopvac to other shop tools lacking built-in dust control features.

The downdraft table won't work too well for tools that spew a stream of dust like my dremel. I built a little attachment that bolts to my workbench and clamps to my shopvac floor sweeper attachment. It does a fantastic job of sucking in dust generated when I powercarve or round off intarsia edges. I'll post a pic this weekend. It's covered with hardware cloth so I don't accidently suck in small workpieces.

[workin for wood]

Tape some cheap filters over all the vents in the basement, intake and exhaust vents, to help keep dust out of the furnace, which in turn reduces dust throughout the house. That's a great place to begin.

[MikeDingas]

Don't forget the health issue associated with sawdust. It can really do a number on your lungs. I try to wear a dust mask when sawing but that usually ends up fogging up my glasses and I chuck the mask.

[earlinjax]

Don't go cheap with your dust collection solution. I have several friends in our wood club with mild to very serious health conditons from breathing dust. A good mask should be the first thing you get.

EarlinJax

[QTOFFER]

Here are some pics of my DIY shopvac benchtop adapter. It's made of 1/2 inch scrap pine with a craft foam gasket and hardware cloth grille. The shop vac floor nozzle is clamped to it and the whole contraption is bolted to the bench.