router advice

[Minnesota scroller]

I'm in the market for a router for light duty work. Do you experienced woodsmen recommend plunge or fixed base? I won't be using it in a table and it won't be deep, heavy duty routing. What do you think of this one?
http://www.amazon.com/Ryobi-Peak-Plu...5?ie=UTF8&s=hi or this http://www.amazon.com/Black-Decker-R...e=UTF8&s=hione

[workin for wood]

you have a portercable/dewalt/delta factory repair center near you? I don't know how far you are from the city, but that's a good place to get a price break on a reconditioned router. Porter cable is one of the best for durability and interchangability with itself, but I have some craftsman routers too that I picked up from classified in the paper and those have never given me any trouble other than the bulky uncomfortableness of them. I have bad luck with black and decker products, but maybe that's just me. The Ryobi router looks like a good deal and somewhat comfortable, and looks like it plunges too. I have no experience with that company, but the price is cheap..maybe it's reconditioned. I have good luck with Bosch products too, and they are usually pretty cheap.
The ryobi you point out is rated for 2 hp, that's more than all you ever need unless your making cabinet doors with raised panels. Remember that's not 2hp all the time, that's 2hp when the machine either catches on fire or the lights go out. but still, it's plenty of power. Keep an eye on them classified's in the paper too...I buy the crappiest routers if they are only 15-20 dollars, and not an orange color, because if they break, I'm only out a few bucks.

[thecopperfish]

I have a Ryobi router and so far I really like it. I haven't had any trouble with it, plenty of power and a really reasonable price. For inexpensive tools, Ryobi seems to make pretty good ones, although I'm not impressed with their cheap scrollsaw. I have several Ryobi tools and have been very satisfied with them, some I bought new and some used. I have put tons of hours on my bench belt/disc sander, thinning boards cause I don't have a planer, without a single problem except wearing out belts. I have thinned some really hardwood. Of course, they aren't professional grade tools, but the price is very good for a decent quality product. (No I don't work for them or have any relatives that do, just a satisfied customer.)

Chris

[Dusty Buffalo]

Jeff,

Do you know if the Portcable factory repair centers have other reconditioned tools? Delta makes a spindle sander for about $200 and I was wondering if they might have something like that. There's one less than an hour from the house. They were about 30 minutes away but moved last month. It still might be worth the drive.

[workin for wood]

according to Ryobi industries employee payout sheets, says right there, Chris the copperfish. I don't see an IRS income claim...you might be in some serious trouble come april !

[workin for wood]

yes Dusty, they sell those if they have one. There was one at the store in detroit yesterday when I was there. One thing I like about them is they fix their products for a flat rate maximum charge. Some repair places charge for parts and then by the hour, and the next thing you know, your $5 away from a brand new tool. Porter cable gives you the same warranty on a reconditioned tool as they do on a new tool, and the warranty stands even in an industrial setting, where alot of other tools don't. Not so sure about their delta division, or maybe delta owns them? The one I saw on the shelf was about $40 under the new price for the spindle sander. You can look online too for reconditioned tools, delta or whatever your into.

[Jediscroller]

Mike,
What are you planning on using it for? This could make a big difference in your choice. If you're just looking for something for putting roundovers and such, a laminate trimmer may be a better option.

[Minnesota scroller]

Kevin, right now the only purpose I have for a router is key hole slots and routing recesses in the back of electrical outlet and switch covers. I'm sure I'll find more uses as time goes on like rounding over edges, etc. Like I said, it will be used for just light duty work, only things I have scrolled.

[thecopperfish]

according to Ryobi industries employee payout sheets, says right there, Chris the copperfish. I don't see an IRS income claim...you might be in some serious trouble come april !

Shhhhhhhh! Don't tell on me!!!

[Jediscroller]

Mike,
For routing key-hole slots the plunge router is a necessity. It will also make recesses much easier. I've had horrible luck with Ryobi tools so I don't recommend them although others have had great luck with them. A router is such a dangerous tool that it's one area where I would never skimp. It sounds like a great deal at $59.99, but I've got bits that cost more than that, hehehe. My first choice in routers is Porter-Cable, followed by Bosch. Both have nice plunge-base models available.