sears 23" scrollsaw - Scroll Saw Woodworking & Crafts Message Board

REDS OLE WOODSHED · 08-23-2006, 09:26 PM

I am looking for "blade holder spring" for my saw. Sears says the part is no longer available. Anyone out there know who I might contact? Thanks.

minowevie · 08-23-2006, 09:30 PM

Hi Reds , sorry i can't help with this, but i do wont to welcome you to the group. I am sure you will get lots of sugjestions. Evie

REDS OLE WOODSHED · 08-24-2006, 12:58 AM

Thanks for the reply. ~~Red~~

CanadianScroller · 08-24-2006, 01:14 AM

I am not sure of that spring but you may be able to find an aftermarket clamp. check out the threads on blade clamps in the forum.

Hope you find more help here

REDS OLE WOODSHED · 08-24-2006, 04:20 AM

I'll give it a try. Thanks

Mick Walker · 08-24-2006, 04:10 PM

Red, try this sight. www.pozsgaidesigns.com. Mick

REDS OLE WOODSHED · 08-24-2006, 10:31 PM

Mick, I have the link from the Canadian Scroller and have sent an e-mail. Now waiting for a response. Thanks for your note. ~~Red~~

08-23-2006, 09:26 PM	#1
REDS OLE WOODSHED Junior Member Join Date: Aug 2006 Posts: 6	sears 23" scrollsaw I am looking for "blade holder spring" for my saw. Sears says the part is no longer available. Anyone out there know who I might contact? Thanks.

08-24-2006, 01:14 AM	#4
CanadianScroller Moderator CUT IT OUT Join Date: Feb 2005 Location: Chilliwack British Columbia, Canada Posts: 3,904 Blog Entries: 12	I am not sure of that spring but you may be able to find an aftermarket clamp. check out the threads on blade clamps in the forum. Hope you find more help here __________________ CAЯL HIRD-RUTTEЯ "proud member of the best scroll sawing forum on the net." Ryobi SC180VS scroll saw EX21

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Continuing Steviegwood's "What is the ultimate fretwork pattern?" thread	miamw	Fretwork and Portraits	25	07-18-2007 10:52 PM
Tools-Ryobi,Sears& Grizzly	lonepine	Tools and Blades	3	02-07-2006 12:30 AM
RECALL--Sears fence	jttheclockman	Message Board FAQ, Suggestions and Feedback	1	04-11-2005 04:21 PM
Sears Sharpener; Crack Wheel	plain_ol_ed	General Carving	2	09-19-2003 03:12 PM
Sears Sharpening Machine	woodenleg	Off Topic	11	06-21-2003 12:05 AM

08-23-2006, 09:30 PM	#2
minowevie Senior Member Join Date: Nov 2005 Location: california Posts: 6,297	Hi Reds , sorry i can't help with this, but i do wont to welcome you to the group. I am sure you will get lots of sugjestions. Evie

08-24-2006, 12:58 AM	#3
REDS OLE WOODSHED Junior Member Join Date: Aug 2006 Posts: 6	Thanks for the reply. ~~Red~~

08-24-2006, 04:20 AM	#5
REDS OLE WOODSHED Junior Member Join Date: Aug 2006 Posts: 6	I'll give it a try. Thanks

08-24-2006, 04:10 PM	#6
Mick Walker Senior Member Join Date: Jan 2005 Location: Janesville, WI Posts: 1,493	Red, try this sight. www.pozsgaidesigns.com. Mick

08-24-2006, 10:31 PM	#7
REDS OLE WOODSHED Junior Member Join Date: Aug 2006 Posts: 6	Mick, I have the link from the Canadian Scroller and have sent an e-mail. Now waiting for a response. Thanks for your note. ~~Red~~