Portable Planer Stand - Scroll Saw Woodworking & Crafts Message Board

flyrod · 10-18-2005, 11:50 AM

Hi, I have just purchased my 1st. portable bench planer. I would like sugestions for a moveable floor stand. I am limited for space. Anyone know where I could find a site for plans??? Much apreciated. flyrod@deepnet.net

CanadianScroller · 10-18-2005, 01:39 PM

If space is limited you might consider a tool stand with a rotating top where two or three tools can be used on the same stand.

There is a nice design at http://plettstone.com/woodworking/shopprojects
I have an old video arcade I cut down to waist hight and made a plywood top for. Insde the base I keep my planer, miter saw and router table. Eventually I would like to make a rtiangular top that would rotate with each tool mounted on it's own facet.

millwab · 10-18-2005, 03:47 PM

Flyrod,
I've seen a couple of variations in WoodSmith over the years. I remember one that was a "flip-top" that CanadianScroller described. There was also one that was a dedicated planer stand (on wheels to get it out of the way when not in use). If you're interested in either of these let me know and I'll dig out the issue number.

Bruce

ABlade · 10-21-2005, 04:38 AM

I have a set of plans for the planer table I built a few months ago. Just something I drew up for a portable table. Works great. Send me an email if interested. norlins@houston.rr.com

Norm

flyrod · 10-22-2005, 05:18 PM

Hi, I am interested in your plan for a planer bench... I haven't found anything yet and that planer is still setting in the box....any help is appreciated. Thanks....flyrod@deepnet.net

10-18-2005, 11:50 AM	#1
flyrod Junior Member Join Date: Oct 2005 Posts: 19	Portable Planer Stand Hi, I have just purchased my 1st. portable bench planer. I would like sugestions for a moveable floor stand. I am limited for space. Anyone know where I could find a site for plans??? Much apreciated. flyrod@deepnet.net

10-18-2005, 01:39 PM	#2
CanadianScroller Moderator CUT IT OUT Join Date: Feb 2005 Location: Chilliwack British Columbia, Canada Posts: 3,881 Blog Entries: 12	Tool Stand If space is limited you might consider a tool stand with a rotating top where two or three tools can be used on the same stand. There is a nice design at http://plettstone.com/woodworking/shopprojects I have an old video arcade I cut down to waist hight and made a plywood top for. Insde the base I keep my planer, miter saw and router table. Eventually I would like to make a rtiangular top that would rotate with each tool mounted on it's own facet. __________________ CAЯL HIRD-RUTTEЯ "proud member of the best scroll sawing forum on the net." Ryobi SC180VS scroll saw EX21

10-18-2005, 03:47 PM	#3
millwab Senior Member Join Date: Sep 2005 Location: NE Ohio Posts: 442	Planer stand options Flyrod, I've seen a couple of variations in WoodSmith over the years. I remember one that was a "flip-top" that CanadianScroller described. There was also one that was a dedicated planer stand (on wheels to get it out of the way when not in use). If you're interested in either of these let me know and I'll dig out the issue number. Bruce

10-21-2005, 04:38 AM	#4
ABlade Member Join Date: Oct 2005 Location: Sugar Land, Texas Posts: 69	Planer table I have a set of plans for the planer table I built a few months ago. Just something I drew up for a portable table. Works great. Send me an email if interested. norlins@houston.rr.com Norm

10-22-2005, 05:18 PM	#5
flyrod Junior Member Join Date: Oct 2005 Posts: 19	Planer bench Hi, I am interested in your plan for a planer bench... I haven't found anything yet and that planer is still setting in the box....any help is appreciated. Thanks....flyrod@deepnet.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Planer Advice Please	CraftyNYScroller	Tools and Blades	12	07-13-2007 08:40 PM
weird experience on the planer. .	CJoZ	General Scroll Saw	9	05-26-2007 06:45 PM
A new toy...a planer	Rivari	Tools and Blades	6	04-27-2005 03:45 AM
Hand Planer	bcarvings	Beginner	16	10-23-2004 01:21 AM
Portable carving table...	toycarver	General Carving	6	02-19-2004 01:49 PM