Vendor Recommendation - Scroll Saw Woodworking & Crafts Message Board

09-08-2005, 01:01 AM

Recently I needed some scroll saw blades, I thought I knew what I wanted, but come right down to it, I didn't. Anyway, I placed an order for some blades, and the vendor (unsolicited) called me back (at eight o'clock in the evening) and discussed what I was cutting and what I really needed. This was on a Friday evening with Monday being a holiday. I received the blades on tuesday. Talk about service above and beyond! Way to go Mike (3M)! Thanks!

CanadianScroller · 09-09-2005, 01:20 PM

Gotta like that Mike guy

I think the only thing better than his blades is his customer service.

Clem Wixted · 09-11-2005, 09:50 PM

I just got my used small Hawk today and am looking for a good blade supplier. Sounds like "service" Mike might be the one.

How do I contact him?

Clem

09-11-2005, 10:12 PM

First off congrats on the saw, then

http://www.mikesworkshop.com

jttheclockman · 09-11-2005, 11:27 PM

Say ED your picture looks pretty good there but you might want to consider giving up smoking. HA HA

09-12-2005, 12:20 AM

I've already had cancer, so I'm immune .... Actually, don't smoke, do drink lots of beer though (Lone Star of course).

Clem Wixted · 09-12-2005, 01:42 AM

Quote:

Originally Posted by Plain_Ol_Ed

First off congrats on the saw, then

http://www.mikesworkshop.com

Ed,

Thanks for the url. After reading today, for hours, I figured that's who it was. I'll call him tomorrow.

Clem

09-08-2005, 01:01 AM	#1
Plain_Ol_Ed Guest Posts: n/a	Vendor Recommendation Recently I needed some scroll saw blades, I thought I knew what I wanted, but come right down to it, I didn't. Anyway, I placed an order for some blades, and the vendor (unsolicited) called me back (at eight o'clock in the evening) and discussed what I was cutting and what I really needed. This was on a Friday evening with Monday being a holiday. I received the blades on tuesday. Talk about service above and beyond! Way to go Mike (3M)! Thanks!

09-09-2005, 01:20 PM	#2
CanadianScroller Moderator CUT IT OUT Join Date: Feb 2005 Location: Chilliwack British Columbia, Canada Posts: 3,904 Blog Entries: 12	Gotta like that Mike guy I think the only thing better than his blades is his customer service. __________________ CAЯL HIRD-RUTTEЯ "proud member of the best scroll sawing forum on the net." Ryobi SC180VS scroll saw EX21

09-11-2005, 09:50 PM	#3
Clem Wixted Member Join Date: Sep 2005 Location: Jonesboro, AR Posts: 31	Looking for blade supplier I just got my used small Hawk today and am looking for a good blade supplier. Sounds like "service" Mike might be the one. How do I contact him? Clem Last edited by Clem Wixted; 09-12-2005 at 01:40 AM. Reason: spelling (typing)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Matting cutters recommendation??	foneman	Tools and Blades	3	08-15-2007 12:40 PM
scroll saw recommendation	parrot lover	Tools and Blades	11	03-01-2007 08:20 PM
Purchasing recommendation	krell-one	General Scroll Saw	5	05-19-2006 05:03 AM
Knife Report/Recommendation	BlackDog	General Carving	5	11-18-2003 04:01 AM

09-11-2005, 10:12 PM	#4
Plain_Ol_Ed Guest Posts: n/a	First off congrats on the saw, then http://www.mikesworkshop.com

09-11-2005, 11:27 PM	#5
jttheclockman Senior Member Join Date: Jan 2004 Location: New Jersey Posts: 743	Say ED your picture looks pretty good there but you might want to consider giving up smoking. HA HA

09-12-2005, 12:20 AM	#6
Plain_Ol_Ed Guest Posts: n/a	I've already had cancer, so I'm immune .... Actually, don't smoke, do drink lots of beer though (Lone Star of course).