router questions

[cpowell]

I've never had a router nor knew anyone, except my dad who did but, by the time he got one I was long married and lived in another city.

So, I bought a router to help out with the framing of my cuttings. Now I have some questions that I should have asked before buying.
1. Is picture framing about all it's good for? I mean besides cutting trim which I don't really plan to do. Ever. Right now.
2. If you are routing thin wood how do you keep it from going in the blade hole at the end of the material? Use longer material and cut it off? Then how do you route that cut? Do I now need to buy a Dremel router set up?
3. How do you route a circle or oval for a base?

I have done a search here but found little info on how to use the thing to its best potential. I did a youtube search but only found how to cut a circle or oval using other router accessories and how to make a frame. If you know of a site; print, photos or video please point me in that direction. I now have the router, the bits and the table from my dad and hate the idea of having all that just to make cut-outs for frames. There must be something else.

thanks in advance
cpowell

[evilbadger]

First question what kind of router did you buy? Trim router or full size?

Routers are useful for all kinds of things but you do need the correct bits and accessories. Routing circles requires either a circle jig or a template to follow with a guide bushing. This web site has just about everything to do with routers Router Forums - Router and Woodworking Discussion Community

After awhile you get crazy like me and build a CNC router table and you can make things like in the pictures.

[cpowell]

It is a plunge router from Harbor Freight, full size. I didn't want to spend a lot until I figured out what to do with it and how I could use it. That way it wouldn't be too great a loss. I figured I could always do some signs at least. I only paid $70. I had borrowed the neighbors non-plunge for a couple of weeks, it was a BD and was loud and a bit slow even with new bits. My new one is much, much quieter and faster and cuts very smooth. I have it attached to my router table.
I'm going now to check out the link.
By the way, that's some really nice work there. You built a CNC machine? How?

[cpowell]

Thanks for the link badger I just registered and am checking it out. It looks very interesting!

[wood-n-things]

Take your time and research information about the proper use of a router. The router can be the 2nd most dangerous tool in your shop. Learn how to use it properly before you even turn it on.

[Rolf]

I have an assortment of routers. One big horsepower one mounted in a table, another smaller one also in a table. But my most used one is a Bosch Colt trim router. I use for all of my rounding over etc. I just bought a rabbeting kit for cutting a recess in picture frames etc.
Mike's advice is very good, a router can take off body parts.

[evilbadger]

I ordered the plans for the CNC from Solsylva CNC Plans~ Home Page
I used the 24" X 48" plans but I increased the length of the X axis to work with the 72" lead screws.

Mike and Rolf did give you great advice be very careful with the router. Sharp bits spinning between 10,000 and 30,000 RPM's can cause serious injury. Always pay attention when using the router and if it doesn't look safe when you are attempting something then don't do it. Sometimes mounted in a table is the way to go but there are other times when you need to use the fixed or plunge base. Between this site and the other site I'm sure you will learn to use your new toy in a safe manner. Never be afraid to ask a question around here.

[Bayward]

Originally Posted by Rolf

But my most used one is a Bosch Colt trim router.

Same here Rolf. That is my "go to" router.

Bob

[cpowell]

Yeah, after mounting it on the table and putting the fence in place I turned it on and thought to myself "Holy Cow! This thing would eat you up!" So, I have a healthy respect for it and am really careful with what and how I do things with it. Over the years I have grown attached to having all my fingers. ha ha ha

There's still a lot for me to learn around here...

[ubgoofy2003]

Yes, you need to respect that Router. I love to use mine, but, I watch very close, how I proceed with my use of it. Enjoy it & let us see some of the things you do with it.
Take Care