drill bits - Scroll Saw Woodworking & Crafts Message Board

sgimbel · 10-30-2009, 09:03 AM

Where can I get longer micro drill bits?

wood-n-things · 10-30-2009, 10:04 AM

How long is longer?

sgimbel · 10-30-2009, 12:29 PM

At least twice as long as I can get from Mike's workshop. Need to be able to drill 2 inch cedar

oily · 10-30-2009, 01:24 PM

Quote:

Originally Posted by sgimbel

At least twice as long as I can get from Mike's workshop. Need to be able to drill 2 inch cedar

Maybe a place to check http://www.micromark.com
If the link doesn't work you can google them.
They specialize in small tools for model building.
Hope this helps Rob (Oily)

Rolf · 10-30-2009, 01:39 PM

I don't know how small a bit you need but.
Go to Mc master Carr
McMaster-Carr
And look up long drill bits.

Greenfield_Bob · 10-30-2009, 07:01 PM

I get mine from Mike's workshop.

Bob

evilbadger · 10-31-2009, 01:24 AM

Scott

Here is a link for you 6" length but they have others too.
Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies

10-30-2009, 09:03 AM	#1
sgimbel Senior Member Join Date: Jan 2008 Location: Round Rock, Texas Posts: 183	drill bits Where can I get longer micro drill bits? __________________ Scott in Round Rock, Texas

10-30-2009, 10:04 AM	#2
wood-n-things Behave Yourself..I can't. Join Date: Nov 2005 Location: Right here ---silly Posts: 4,471 Blog Entries: 1	How long is longer? __________________ The Mike One of them anyway. Don't be so open-minded. Your brains will fall out!

10-30-2009, 12:29 PM	#3
sgimbel Senior Member Join Date: Jan 2008 Location: Round Rock, Texas Posts: 183	At least twice as long as I can get from Mike's workshop. Need to be able to drill 2 inch cedar __________________ Scott in Round Rock, Texas

10-30-2009, 01:39 PM	#5
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	I don't know how small a bit you need but. Go to Mc master Carr McMaster-Carr And look up long drill bits. __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

10-30-2009, 07:01 PM	#6
Greenfield_Bob Senior Member Join Date: Jan 2004 Location: Central Indiana Posts: 1,417	I get mine from Mike's workshop. Bob __________________ Delta P-20 & Q-3 Ever notice that anyone going slower than you is an idiot, but anyone going faster than you is a maniac?

10-31-2009, 01:24 AM	#7
evilbadger Senior Member Join Date: Jul 2009 Posts: 314	Scott Here is a link for you 6" length but they have others too. Enco - Guaranteed Lowest Prices on Machinery, Measuring Tools, Cutting Tools and Shop Supplies __________________ Tim "Bigamy is having one wife too many. Monogamy is the same." - -- Oscar Wilde

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode