Were to buy Macro drill bits - Scroll Saw Woodworking & Crafts Message Board

Band Saw Box · 10-23-2009, 01:29 AM

Hello Everyone
I need to buy some macro drill bits. I know I need #63 and #57 for sure for use with a FDUR #5 & #7. I cant seam to find them, Sloan's Woodshop has macro drill bit but not those sizes. I would like to find a place that sells them like Sloan's does by the doz. I need that least one to get started on the Candy Dish I'm working on and I think I can find one at Ace Hardware. I'm hoping someone know of a good place to get the sizes I need. I want to use as small an entry holes as I can in making the Candy Dish so it will be easier to sand.

Wood Dog · 10-23-2009, 01:50 AM

Flying Dutchman blades salesman Mike carries them.
New Products
If you have a hobby store around you they should have them also.

Firedkm · 10-23-2009, 01:50 AM

Mikes workshop sell them! New Products

Band Saw Box · 10-23-2009, 02:12 AM

Thanks WD & Firedkm, I looked at that page at least 3 times and never saw the bits. I'll order some tomorrow. Mike is really good about getting out his orders fast. I guesss I order some blades at the same time.

scrollpup · 10-23-2009, 06:31 AM

I ordered from Mike yesterday.Within 15 minutes, I had a phone call from him to get the correct numbers off my card

, and I even wound up changing one of my blade orders after asking him for his opionion on what I needed. Heck of a guy to do business with! Fast and courtious!

Jerry

Big_red_S · 10-23-2009, 01:55 PM

I bought them, as well the attachment to the drill press, from Rockler.

Rolf · 10-23-2009, 03:42 PM

Try MSC or Mc Master Carr

10-23-2009, 01:29 AM	#1
Band Saw Box World's Greatest Scroller Join Date: Oct 2008 Location: Hampton, VA Posts: 1,005	Were to buy Macro drill bits Hello Everyone I need to buy some macro drill bits. I know I need #63 and #57 for sure for use with a FDUR #5 & #7. I cant seam to find them, Sloan's Woodshop has macro drill bit but not those sizes. I would like to find a place that sells them like Sloan's does by the doz. I need that least one to get started on the Candy Dish I'm working on and I think I can find one at Ace Hardware. I'm hoping someone know of a good place to get the sizes I need. I want to use as small an entry holes as I can in making the Candy Dish so it will be easier to sand. __________________ : Dan US Navy PR1 (Ret) To all who serve or have served, Thank you Well I am the worlds greatest scroller at my house. Last edited by Band Saw Box; 10-23-2009 at 01:45 AM.

10-23-2009, 01:50 AM	#2
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,451	Flying Dutchman blades salesman Mike carries them. New Products If you have a hobby store around you they should have them also. __________________ WD Last edited by Wood Dog; 10-23-2009 at 01:52 AM.

10-23-2009, 01:50 AM	#3
Firedkm Puzzle enthusiast Join Date: Nov 2008 Posts: 122	Mikes workshop sell them! New Products __________________ Dale#2 with a yella saw Dalespuzzles.com

10-23-2009, 02:12 AM	#4
Band Saw Box World's Greatest Scroller Join Date: Oct 2008 Location: Hampton, VA Posts: 1,005	Thanks WD & Firedkm, I looked at that page at least 3 times and never saw the bits. I'll order some tomorrow. Mike is really good about getting out his orders fast. I guesss I order some blades at the same time. __________________ : Dan US Navy PR1 (Ret) To all who serve or have served, Thank you Well I am the worlds greatest scroller at my house.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-23-2009, 06:31 AM	#5
scrollpup Avatar by Casey Join Date: Jan 2009 Location: Hot Springs,Arkansas Posts: 1,732	I ordered from Mike yesterday.Within 15 minutes, I had a phone call from him to get the correct numbers off my card , and I even wound up changing one of my blade orders after asking him for his opionion on what I needed. Heck of a guy to do business with! Fast and courtious! Jerry __________________ Two wrongs don't make a right....they just even the score...

10-23-2009, 01:55 PM	#6
Big_red_S Senior Member Join Date: May 2008 Posts: 722	I bought them, as well the attachment to the drill press, from Rockler. __________________ Living well is the best revenge

10-23-2009, 03:42 PM	#7
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,809	Try MSC or Mc Master Carr __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"