Frank Pozsgai's E-Z set blade holder question

[Cutting Cathy]

I didn't want to hi-jack Steve's thread about the Hawk Fusion, so started a different one for my question. I am still looking at Pozsgai's blade holder stystem for my Hawk 20" Ultra. I see now that he has a blade holder for the bottom now! My question is, what is the benefit of having the bottom holder this way?? Would this mean the possibility of top feeding with my Hawk?? I know one thing, you wouldn't have to tighten the blade with the little knob anymore!!

[STEVESSAWSHOP]

Cathy,
Franks upper blade holder with bracket - line item #1 part will only fit Rbi Hawk Ultra model saw 220, 226 . If you owen a Hawk Pro, 2 and 3 speed model saws (before 1994) this will not work as well do to different design of front cam handle and cam. (attaches to cam handle inside upper arm). Frank's parts 2-5 fit G426 and G426 Fusion model saws only. The G4 model saws have a hold down arm retainer with lever to hold arm down while installing blade. One thing to consider to any G4 owners is if you have a Quick-set upper and lower holder you will not be able to remove lower blade holder to chuck up your blade size. If you are like me I have 5 lower holders with 5 size blades ready to go. I would lean to line item #4 on Frank's parts list.
Hope this helps!
Steve