Need part for Delta scroll saw 40-650 Q3 type 1 - Scroll Saw Woodworking & Crafts Message Board

jennyqbee1 · 07-09-2009, 08:59 PM

help help help.......broke tension lever not available from delta ...informed not weldable ...if anyone can help me locate even a machine for parts ...1,000's of hours on my saw and i dont want to part with it.....the part # is 1347369 ot retro fit kit #1342500....im crossing my fingers im desperate...willing to purchase part

ubgoofy2003 · 07-09-2009, 10:45 PM

I have one Jenny, but, can't give up the part either. I use it now & then along with my 788. I guess mine isn't worth much either, if I can't get parts for it. Are you saying they don't make the parts for that one? Live & learn, I guess. Hope you can find it somewhere. Maybe you could have one made for it. Possibility !
Perk

JustMe1954 · 07-09-2009, 11:02 PM

I work at a tool repair place. I will see what I can find.

Artistry in Wood · 07-10-2009, 01:11 AM

Hi Jenny
I have the same saw and love it too

Try here for parts Delta 40-650 Parts List and Diagram - Type 1 : eReplacementParts.com

Good luck

Andrew

NRscroller · 07-15-2009, 12:10 PM

Try this place, they are in St. Paul Minnesota and have parts for delta.
Tool Repair At Seven Corners
Good luck
Bill

sawdustus · 07-15-2009, 01:05 PM

Jenny, Delta is owned by Dewalt and the Dewalt repair shops are often able to get parts for older Delta machines. Try the yellow pages to find a Dewalt repair shop in your area and talk to them. They were able to get me a blower nozzle for my 650 by finding one in a Dewalt parts place in the midwest.

george

Mick Walker · 07-15-2009, 04:44 PM

jenny, here are a couple more places to try. Tool Parts Direct . com - The Online Tool Repair Parts Store eReplacementParts.com : Power Tool Parts and Tool Repair
Good luck.

Bret · 11-01-2009, 05:17 PM

Jenny, I have the same saw and it needs the same parts. Did you have any luck finding them?

JimmyME · 11-06-2009, 03:52 PM

Bret,

Good luck. I too am searching for this part as it broke off my Q3 during a move. I've had no luck in locating this part anywhere.

I'm a little disappointed that my 13 year old Delta Q3 (top of the line at the time) is now unusable due to a critical part not being available. Delta (in my mind anyway) was always know for excellent service and parts for their older tools and equipment. It's not as though this is a 1971 saw for Pete's sake, and it's already useless due to Black and Decker's decision to not make any more of this cheap, die cast part.

Anyway, today at lunch I'm running up to the local machine shop to see what they would charge to fabricate a replacement upper blade holder that would work with the available 40-251 Quickset II blade chuck. If it's not exorbitant, I'm going to get one made and get my Q3 back on line!

Jim

Kepy · 11-07-2009, 11:35 AM

If it will help, the upper chuck assembly is the same for the 350. I also have a Q3 and they are interchangeable.

07-09-2009, 10:45 PM	#2
ubgoofy2003 Senior Member Join Date: Mar 2007 Location: Arizona Posts: 486	I have one Jenny, but, can't give up the part either. I use it now & then along with my 788. I guess mine isn't worth much either, if I can't get parts for it. Are you saying they don't make the parts for that one? Live & learn, I guess. Hope you can find it somewhere. Maybe you could have one made for it. Possibility ! Perk Last edited by ubgoofy2003; 07-09-2009 at 10:49 PM.

07-10-2009, 01:11 AM	#4
Artistry in Wood Member Join Date: Jun 2007 Location: Midland,Ontario,Canada Posts: 64	Hi Jenny I have the same saw and love it too Try here for parts Delta 40-650 Parts List and Diagram - Type 1 : eReplacementParts.com Good luck Andrew __________________ It Seems To Me I've Lived My Life A Lot Better Than I Think I Have

07-15-2009, 12:10 PM	#5
NRscroller Member Join Date: Jan 2009 Posts: 71	Try this place, they are in St. Paul Minnesota and have parts for delta. Tool Repair At Seven Corners Good luck Bill __________________ DEWALT 788 and Hegner 18vs..... AND STILL CUTTIN IT UP!!!!

07-15-2009, 01:05 PM	#6
sawdustus Senior Member Join Date: Jun 2006 Location: New Jersey Posts: 1,975	Jenny, Delta is owned by Dewalt and the Dewalt repair shops are often able to get parts for older Delta machines. Try the yellow pages to find a Dewalt repair shop in your area and talk to them. They were able to get me a blower nozzle for my 650 by finding one in a Dewalt parts place in the midwest. george __________________ A day without sawdust is a day without sunshine. George delta 650, hawk G426

07-15-2009, 04:44 PM	#7
Mick Walker Senior Member Join Date: Jan 2005 Location: Janesville, WI Posts: 1,335	jenny, here are a couple more places to try. Tool Parts Direct . com - The Online Tool Repair Parts Store eReplacementParts.com : Power Tool Parts and Tool Repair Good luck. __________________ Mick, - Delta P-20 The future ain't what it used to be.

07-09-2009, 08:59 PM	#1
jennyqbee1 Junior Member Join Date: Oct 2008 Posts: 3	Need part for Delta scroll saw 40-650 Q3 type 1 help help help.......broke tension lever not available from delta ...informed not weldable ...if anyone can help me locate even a machine for parts ...1,000's of hours on my saw and i dont want to part with it.....the part # is 1347369 ot retro fit kit #1342500....im crossing my fingers im desperate...willing to purchase part

07-09-2009, 11:02 PM	#3
JustMe1954 Member Join Date: Mar 2008 Location: Phx AZ Posts: 75	I work at a tool repair place. I will see what I can find.

11-01-2009, 05:17 PM	#8
Bret Junior Member Join Date: Nov 2009 Posts: 1	Jenny, I have the same saw and it needs the same parts. Did you have any luck finding them?

11-06-2009, 03:52 PM	#9
JimmyME Junior Member Join Date: Nov 2009 Posts: 1	Bret, Good luck. I too am searching for this part as it broke off my Q3 during a move. I've had no luck in locating this part anywhere. I'm a little disappointed that my 13 year old Delta Q3 (top of the line at the time) is now unusable due to a critical part not being available. Delta (in my mind anyway) was always know for excellent service and parts for their older tools and equipment. It's not as though this is a 1971 saw for Pete's sake, and it's already useless due to Black and Decker's decision to not make any more of this cheap, die cast part. Anyway, today at lunch I'm running up to the local machine shop to see what they would charge to fabricate a replacement upper blade holder that would work with the available 40-251 Quickset II blade chuck. If it's not exorbitant, I'm going to get one made and get my Q3 back on line! Jim

11-07-2009, 11:35 AM	#10
Kepy Senior Member Join Date: Feb 2004 Location: Elkland, MO Posts: 120	If it will help, the upper chuck assembly is the same for the 350. I also have a Q3 and they are interchangeable.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode