Stacking Wood - Scroll Saw Woodworking & Crafts Message Board

kingbrat · 05-01-2009, 01:05 AM

Whats the Best blade to use when stacking two pieces of 1/4 bb for fretwork just need some imput.Im making a music box with a lot of fretwork .

wood-n-things · 05-01-2009, 01:43 AM

If it is intricate I use a #2/0, if not I bump it up to a #3-or #5.
Once again I'm afraid it may be a matter of preference and skill attained. One person may be comfortable with what I use and another will not.

marshall · 05-01-2009, 02:21 AM

I agree with Mike on this , but I also use the # 1/0 flying Dutchman also and have had good luck with it.

...............Marshall

kingbrat · 05-01-2009, 03:38 AM

I was using a #5 dubble tooth reverse blade the single tooth was to rough on the turns .

lucky788scroller · 05-03-2009, 12:48 AM

Id use a #1 or a #3 FD-TC

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-01-2009, 01:05 AM	#1
kingbrat Senior Member Join Date: Oct 2008 Posts: 340	Stacking Wood Whats the Best blade to use when stacking two pieces of 1/4 bb for fretwork just need some imput.Im making a music box with a lot of fretwork .

05-01-2009, 01:43 AM	#2
wood-n-things Behave Yourself..I can't. Join Date: Nov 2005 Location: Right here ---silly Posts: 4,296 Blog Entries: 1	If it is intricate I use a #2/0, if not I bump it up to a #3-or #5. Once again I'm afraid it may be a matter of preference and skill attained. One person may be comfortable with what I use and another will not. __________________ The Mike One of them anyway. Don't be so open-minded. Your brains will fall out! Remember.......Just going to church doesn't make you a Christian any more than standing in your garage makes you a car..

05-01-2009, 02:21 AM	#3
marshall Just love Being Here Join Date: May 2008 Location: Jonesboro AR Posts: 2,019	I agree with Mike on this , but I also use the # 1/0 flying Dutchman also and have had good luck with it................Marshall __________________ Usually busier than a cat in a sandbox !!!!!!!!!!! { Dewalt 788 only }

05-01-2009, 03:38 AM	#4
kingbrat Senior Member Join Date: Oct 2008 Posts: 340	I was using a #5 dubble tooth reverse blade the single tooth was to rough on the turns .

05-03-2009, 12:48 AM	#5
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,238	Id use a #1 or a #3 FD-TC __________________ Dale w/ yella saws