I have a Hawk 220vs saw - Scroll Saw Woodworking & Crafts Message Board

kraig · 03-08-2009, 10:22 PM

I bought a used Hawk 220 vs saw last week as it happens the same day the company closed. It seems to be in great shape but, is missing the adjustible sawdust blower hose. It has the tube but, is missing the adjustible hose. I thought I was just going to order one from the company but, like I said I bought it the day they closed. Does any one have any Ideas as to what I could use? Thank you Kraig. Just starting out.

millwab · 03-09-2009, 01:34 AM

Kraig,
Depending on how old your Hawk is, that tube is the "adjustable blower hose." My Hawk goes back quite a few years, and all I have is the tube coming from the pump. It adjusts by changing it's position in the clamp holding the end of the tube. I'm not sure when they started using the segmented blower hoses.

Okie_Arkie_Wood_Cutter · 03-09-2009, 02:30 AM

I think you may be able to buy the segmented blower hose from from some of the supply houses.

kraig · 03-09-2009, 04:57 PM

Thank you for the replies. Bruce the clamp on the end of the bar on my saw just holds the tube tight to the top of the bar. I don’t think there is any way t to adjust the direction of the tube. Mikes Workshop has a Air blower nozzle for Hegner saws that I was thinking may work. Thanks again. Kraig

woodman24 · 03-09-2009, 07:40 PM

Hello, does anyone know where someone can get Hawk scroll saw parts, since the company closed without any direction for help in this matter. If anyone can offer any information, Thanks...

lucky788scroller · 03-10-2009, 03:05 AM

if you cant find the adjustable hose like your looking for, you can just use a piece of that clear air hose, and if you want it positionable, use a piece of wire, and spiral the wire around the hose to hold it.Then, bend the wire to wherever you want the hose to blow at, and that will hold it in place for you.

03-08-2009, 10:22 PM	#1
kraig Junior Member Join Date: Mar 2009 Location: Salem, Or Posts: 18	I have a Hawk 220vs saw I bought a used Hawk 220 vs saw last week as it happens the same day the company closed. It seems to be in great shape but, is missing the adjustible sawdust blower hose. It has the tube but, is missing the adjustible hose. I thought I was just going to order one from the company but, like I said I bought it the day they closed. Does any one have any Ideas as to what I could use? Thank you Kraig. Just starting out.

03-09-2009, 01:34 AM	#2
millwab Senior Member Join Date: Sep 2005 Location: NE Ohio Posts: 425	Kraig, Depending on how old your Hawk is, that tube is the "adjustable blower hose." My Hawk goes back quite a few years, and all I have is the tube coming from the pump. It adjusts by changing it's position in the clamp holding the end of the tube. I'm not sure when they started using the segmented blower hoses. __________________ Bruce . . . because each piece will be someone's heirloom someday. visit sometime Hawk 220VS, Delta 40-570

03-09-2009, 02:30 AM	#3
Okie_Arkie_Wood_Cutter Senior Member Join Date: May 2006 Location: SouthWest Arkansas Posts: 518	I think you may be able to buy the segmented blower hose from from some of the supply houses. __________________ You can take the boy out of the hill country, but you can not take the hill country out of the boy. Okie's Cuttings and Patterns http://s210.photobucket.com/albums/bb24/okiearkie/ darrell, the okiearkie

03-09-2009, 04:57 PM	#4
kraig Junior Member Join Date: Mar 2009 Location: Salem, Or Posts: 18	Blower Nozzle Thank you for the replies. Bruce the clamp on the end of the bar on my saw just holds the tube tight to the top of the bar. I don’t think there is any way t to adjust the direction of the tube. Mikes Workshop has a Air blower nozzle for Hegner saws that I was thinking may work. Thanks again. Kraig

03-10-2009, 03:05 AM	#6
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,354	if you cant find the adjustable hose like your looking for, you can just use a piece of that clear air hose, and if you want it positionable, use a piece of wire, and spiral the wire around the hose to hold it.Then, bend the wire to wherever you want the hose to blow at, and that will hold it in place for you. __________________ Dale w/ yella saws

03-09-2009, 07:40 PM	#5
woodman24 Junior Member Join Date: Mar 2009 Posts: 2	Hello, does anyone know where someone can get Hawk scroll saw parts, since the company closed without any direction for help in this matter. If anyone can offer any information, Thanks...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode