Dremel 1830 - Scroll Saw Woodworking & Crafts Message Board

Simplyme · 12-05-2008, 09:42 PM

Does anyone know the size of the dust port on this machine?

rippersmom · 12-06-2008, 05:43 AM

Do you want inside diameter or outside diameter?? I have the 1800, same machine, but it has the sander attached. Dust port would be the same.

I'll go out to the shop and measure it. Do you need the depth too? Let me know.

Nancy in AZ

Simplyme · 12-07-2008, 06:19 AM

Outside diameter. Sorry fro the long wait to your reply.

tstagman · 12-07-2008, 02:41 PM

I'm not exactly sure of the diameter, but I can tell you the small hose from my shop vac fits it perfectly.

naveall · 12-07-2008, 06:52 PM

it is like a 2 inch od. we have the same thing our small shop vac hose fits right on the port, we run two and if we get them plugged up with dust a pieces this is how we clean it out

rippersmom · 12-07-2008, 11:42 PM

Hi,
Outside diameter of the dust port is 1 1/2".

Nancy in AZ

rippersmom · 12-07-2008, 11:43 PM

Oh, and yes, the small shop vac hose fits inside it.

tookiedoo78 · 12-08-2008, 03:37 PM

My shop vac has a 2 1/2" hose. I bought a 2 1/2" to 1 1/4" adapter and it fits the port perfectly. The adapter is only a couple bucks at Home Depot. Hope this helps!

12-05-2008, 09:42 PM	#1
Simplyme Senior Member Join Date: Sep 2008 Posts: 182	Dremel 1830 Does anyone know the size of the dust port on this machine?

12-07-2008, 02:41 PM	#4
tstagman Senior Member Join Date: Nov 2008 Location: Kentucky Posts: 810	I'm not exactly sure of the diameter, but I can tell you the small hose from my shop vac fits it perfectly. __________________ Terry http://www.scrollsawer.com/gallery/s...0/ppuser/12859 The Hurrier I go, the Behinder I get!!

12-08-2008, 03:37 PM	#8
tookiedoo78 Member Join Date: May 2008 Location: Elgin, SC Posts: 75	My shop vac has a 2 1/2" hose. I bought a 2 1/2" to 1 1/4" adapter and it fits the port perfectly. The adapter is only a couple bucks at Home Depot. Hope this helps! __________________ It's only funny until someone gets hurt. Than it's hilarious! Josh

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-06-2008, 05:43 AM	#2
rippersmom Senior Member Join Date: Nov 2008 Posts: 185	Do you want inside diameter or outside diameter?? I have the 1800, same machine, but it has the sander attached. Dust port would be the same. I'll go out to the shop and measure it. Do you need the depth too? Let me know. Nancy in AZ

12-07-2008, 06:19 AM	#3
Simplyme Senior Member Join Date: Sep 2008 Posts: 182	Outside diameter. Sorry fro the long wait to your reply.

12-07-2008, 06:52 PM	#5
naveall Senior Member Join Date: Jul 2007 Posts: 152	it is like a 2 inch od. we have the same thing our small shop vac hose fits right on the port, we run two and if we get them plugged up with dust a pieces this is how we clean it out

12-07-2008, 11:42 PM	#6
rippersmom Senior Member Join Date: Nov 2008 Posts: 185	Hi, Outside diameter of the dust port is 1 1/2". Nancy in AZ

12-07-2008, 11:43 PM	#7
rippersmom Senior Member Join Date: Nov 2008 Posts: 185	Oh, and yes, the small shop vac hose fits inside it.