sanding mops - Scroll Saw Woodworking & Crafts Message Board

resauers · 09-28-2008, 10:37 PM

Hi everyone. I'm new to this site. I was wondering if anyone knows where I purchase sanding mops from Klingspor? Or if anyone has an better idea on how to sand edges on art puzzles. Thanks in advance.

Russ

bobthebuilder · 09-28-2008, 11:43 PM

resauers,
saw you were looking for sanding mops I was on the internet poking around and saw you can buy them and either rjrstudios.com or at woodcraft.com
hope this helps

Dick-Miraglia · 09-28-2008, 11:45 PM

Russ: Phone number is 1-800-228-0000 or just click on this link for the Klingspor Website Klingspor's Woodworking Shop,klingspor's,Klingspor's,woodworking,supplies, tools,proxxon,disc,sanding sleeves,sandpaper,belts
Dick

resauers · 09-29-2008, 12:10 AM

Thank you!!

marshall · 09-29-2008, 01:19 PM

Quote:

Originally Posted by resauers

Hi everyone. I'm new to this site. I was wondering if anyone knows where I purchase sanding mops from Klingspor? Or if anyone has an better idea on how to sand edges on art puzzles. Thanks in advance.

Russ

Resauers : Let us know how you like that sanding mop , cause I've been thinking about asking for one for Christmas this year . I can see that it would be a great asset in the shop , now don't forget to let us know !!! Marshall

JohnB · 09-29-2008, 01:25 PM

G'day Marshall,
I purchased a kit from Klingspor about 12 months ago. It had two sets of paper eg. two mops and a mandrel.
I can't remember what I paid but it wasn't cheap. especially when you add on postage to Oz.

I've been so impressed with it though, I will be ordering some more. I got the 180g one, next I think I'll get 120g as well.

marshall · 09-29-2008, 01:41 PM

Quote:

Originally Posted by JohnB

G'day Marshall,
I purchased a kit from Klingspor about 12 months ago. It had two sets of paper eg. two mops and a mandrel.
I can't remember what I paid but it wasn't cheap. especially when you add on postage to Oz.

I've been so impressed with it though, I will be ordering some more. I got the 180g one, next I think I'll get 120g as well.

John b thanks so much , I'm sure that the wife thinks that I've been a good little boy this year, this is one thing I'm wanting and a new metal shoot that hooks on the bottom of the saw for dust collecting, sheet metal with the shoot at a 45 degree angle . They say that it takes the dust out better, of course it better than my home made job !!!! If I forget where to get this mop , I may be getting back to you John before the years up !!!!!!!!!!

alot Buddy!!!! Marshall

resauers · 10-10-2008, 12:28 AM

I ordered the 120 kit. It works great. Doesn't get into some of the tight spots as I had hoped but I also purchased a small mop for a Dremel tool. The small one got into the tight spots and cleaned up the puzzle great. Thanks for all your help!!

Russ

Rolf · 10-10-2008, 01:09 PM

Another alternative, and one I like better than the flapsanders, is Klingspores MacMop.
They have some already mounted on a spindle 7 indiameter for $29. They work much better (for me) and seem to last longer. one part # is MM07102

DAdams · 02-19-2009, 11:47 PM

Russ where did you find a Mop sander for the Dremel tool? I 'm wanting one to do wooden spoons.

09-28-2008, 10:37 PM	#1
resauers Junior Member Join Date: Sep 2008 Posts: 4	sanding mops Hi everyone. I'm new to this site. I was wondering if anyone knows where I purchase sanding mops from Klingspor? Or if anyone has an better idea on how to sand edges on art puzzles. Thanks in advance. Russ

09-28-2008, 11:45 PM	#3
Dick-Miraglia Carved Fretwork Join Date: Mar 2008 Location: Pennsylvania Posts: 163	Klingspor's Contact Information Russ: Phone number is 1-800-228-0000 or just click on this link for the Klingspor Website Klingspor's Woodworking Shop,klingspor's,Klingspor's,woodworking,supplies, tools,proxxon,disc,sanding sleeves,sandpaper,belts Dick __________________ Dick Miraglia http://www.scrollsawer.com/gallery/s...r/9638/cat/500 Last edited by Dick-Miraglia; 09-29-2008 at 01:27 PM.

09-29-2008, 01:25 PM	#6
JohnB 1 Tin Soldier Rides Away Join Date: Sep 2007 Location: Kalgoorlie, Western Australia Posts: 4,859	G'day Marshall, I purchased a kit from Klingspor about 12 months ago. It had two sets of paper eg. two mops and a mandrel. I can't remember what I paid but it wasn't cheap. especially when you add on postage to Oz. I've been so impressed with it though, I will be ordering some more. I got the 180g one, next I think I'll get 120g as well. __________________ Regards John "The Golden Mile" I got holes in both of my shoes Well I'm a walking case of the blues Saw a dollar yesterday But the wind blew it away Some of my Stuff Retired Medically Unfit WA Police Officers

10-10-2008, 01:09 PM	#9
Rolf Senior Member Join Date: Apr 2005 Location: Bellport, LI New York Posts: 2,808	Another alternative, and one I like better than the flapsanders, is Klingspores MacMop. They have some already mounted on a spindle 7 indiameter for $29. They work much better (for me) and seem to last longer. one part # is MM07102 __________________ Rolf RBI G4 Hawk, Delta SS350 Philosophy "I don't know that I can't, therefore I can"

02-19-2009, 11:47 PM	#10
DAdams Senior Member Join Date: Sep 2005 Location: Kellogg Iowa Posts: 173	Russ where did you find a Mop sander for the Dremel tool? I 'm wanting one to do wooden spoons. __________________ Deb Adams jeepnut58@yahoo.com

09-28-2008, 11:43 PM	#2
bobthebuilder Senior Member Join Date: Sep 2008 Location: Richmond, MN Posts: 148	resauers, saw you were looking for sanding mops I was on the internet poking around and saw you can buy them and either rjrstudios.com or at woodcraft.com hope this helps

09-29-2008, 12:10 AM	#4
resauers Junior Member Join Date: Sep 2008 Posts: 4	Thank you!!

10-10-2008, 12:28 AM	#8
resauers Junior Member Join Date: Sep 2008 Posts: 4	I ordered the 120 kit. It works great. Doesn't get into some of the tight spots as I had hoped but I also purchased a small mop for a Dremel tool. The small one got into the tight spots and cleaned up the puzzle great. Thanks for all your help!! Russ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode