FD Blades - Scroll Saw Woodworking & Crafts Message Board

SNAPPER · 12-21-2007, 09:56 AM

I recieved a sample of the new FD-UR #5 blade. performed great. I was able to flip the blade for a fresh set of teeth. Not sure if it was designed to be flipped but it worked until it broke.
Dean

BRScroller · 12-21-2007, 01:14 PM

I just recieved my sample of FD-UR also, and it is a nice blade. This was the first FD I have used and I think I am sold on them.

Greenfield_Bob · 12-21-2007, 05:42 PM

I used the FD-UR a while back and worked great.

Bob

Dragon · 12-23-2007, 02:57 AM

Where did you get a sample from?
Diane

Mike Crosa · 12-23-2007, 03:03 AM

Just email Mike of Flying Dutchman and he will mail you a few rapido.

Mike C

doodle1 · 12-23-2007, 08:00 AM

I just ordered a sample pack from Mike. This is my first order with him and hopefully not the last as I'm tired of paying way too much for blades from the local hardware store.

jtccar · 12-27-2007, 05:30 AM

What does the UR? stand for? Thanks

SNAPPER · 12-27-2007, 07:05 AM

I believe UR stands for ultra reverse tooth.
doodle1, I have found that blades from retail stores are almost twice as much as ordering them.
Happy Scrolling
Dean

doodle1 · 12-28-2007, 12:50 AM

Snapper, you are absolutely right on that! I bought 2 packs of blades, 16 blades in total, and paid almost $20 for only blades! Way too much!

ubgoofy2003 · 12-28-2007, 02:50 AM

Quote:

Originally Posted by Dragon

Where did you get a sample from?
Diane

I have used the Flying Dutchmen blades for a long time & they are great ! If you email mikesworkshop.com you can choose blades, drill bits etc. from him & he will send a sample pack for you to try. Enjoy ! Perk

12-21-2007, 09:56 AM	#1
SNAPPER Dino Join Date: Oct 2007 Location: Fergus Falls,MN Posts: 821	FD Blades I recieved a sample of the new FD-UR #5 blade. performed great. I was able to flip the blade for a fresh set of teeth. Not sure if it was designed to be flipped but it worked until it broke. Dean

12-21-2007, 01:14 PM	#2
BRScroller Senior Member Join Date: Nov 2007 Location: Florida Posts: 170	I just recieved my sample of FD-UR also, and it is a nice blade. This was the first FD I have used and I think I am sold on them. __________________ Brad R. 18" Craftsman Pro

12-21-2007, 05:42 PM	#3
Greenfield_Bob Senior Member Join Date: Jan 2004 Location: Central Indiana Posts: 1,417	I used the FD-UR a while back and worked great. Bob __________________ Delta P-20 & Q-3 Ever notice that anyone going slower than you is an idiot, but anyone going faster than you is a maniac?

12-23-2007, 02:57 AM	#4
Dragon scroller and moderator Join Date: Dec 2006 Location: Chertsey, Quebec, Canada Posts: 2,421	Where did you get a sample from? Diane __________________ Dragon Owner of a Dewalt 788 PuffityDragon on AFSP

12-23-2007, 08:00 AM	#6
doodle1 Member Join Date: Jan 2007 Location: Williams Lake, BC Posts: 332	I just ordered a sample pack from Mike. This is my first order with him and hopefully not the last as I'm tired of paying way too much for blades from the local hardware store. __________________ Sherri

12-23-2007, 03:03 AM	#5
Mike Crosa Land Locked Join Date: Jan 2005 Location: Ocala, FL Posts: 1,694	Just email Mike of Flying Dutchman and he will mail you a few rapido. Mike C

12-27-2007, 05:30 AM	#7
jtccar Junior Member Join Date: Sep 2007 Posts: 4	Fd-ur? What does the UR? stand for? Thanks

12-27-2007, 07:05 AM	#8
SNAPPER Dino Join Date: Oct 2007 Location: Fergus Falls,MN Posts: 821	I believe UR stands for ultra reverse tooth. doodle1, I have found that blades from retail stores are almost twice as much as ordering them. Happy Scrolling Dean

12-28-2007, 12:50 AM	#9
doodle1 Member Join Date: Jan 2007 Location: Williams Lake, BC Posts: 332	Snapper, you are absolutely right on that! I bought 2 packs of blades, 16 blades in total, and paid almost $20 for only blades! Way too much! __________________ Sherri

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode