Blade holders - Scroll Saw Woodworking & Crafts Message Board

mtcarver · 12-12-2007, 12:09 AM

I am looking for old style blade holders the scrollsaw is a Lowe's taskforce 16inch (when the blade breaks the holder's fly off it seem's tension is what hold's them in place) i checked with Lowes they say they cant get them

NC Scroller · 12-12-2007, 02:37 AM

If you or the local Lowe's store has the manual you should be able to find the contact information and contact Task Force directly. The design does not sound real effective. Have you considered upgrading to a better saw? Check you local Craig's list or pawn shops.

Good Luck

Mick Walker · 12-12-2007, 09:27 PM

mtcarver, check with Rick at www.scrollsaws.com. He may be able to help you find them.

earlinjax · 12-12-2007, 09:28 PM

I had some similar to that on my first saw - Ryobi. There is still one lost in the garage but we have moved. Maybe the new owner found it. Those kind of holders can get very frustrating. Good luck.

Earl

Plaquerd · 12-13-2007, 12:08 AM

MT
Try this link. It is for Ryobi parts. I think Ryobi makes the saw for Lowes. The clamp you show looks just like the ones on a Ryobi I had. #37 on the parts list, part #S1603005B. Won't hurt ask them.

http://www.ryobitools.com/parts
Click on power tool parts store, click on repair parts catalog, click on model and then from there do a search for a 16" scroll saw in the search box. Good luck.

daveswoodworking · 12-16-2007, 12:16 AM

i have some of them

mtcarver · 12-17-2007, 06:55 PM

What would you take for a set?

12-12-2007, 02:37 AM	#2
NC Scroller Senior Member Join Date: Jul 2005 Location: Cary, NC Posts: 334	If you or the local Lowe's store has the manual you should be able to find the contact information and contact Task Force directly. The design does not sound real effective. Have you considered upgrading to a better saw? Check you local Craig's list or pawn shops. Good Luck __________________ Scott Email: smi11er@aol.com

12-13-2007, 12:08 AM	#5
Plaquerd Member Join Date: Aug 2007 Location: Northwest New Jersey Posts: 1,371	MT Try this link. It is for Ryobi parts. I think Ryobi makes the saw for Lowes. The clamp you show looks just like the ones on a Ryobi I had. #37 on the parts list, part #S1603005B. Won't hurt ask them. http://www.ryobitools.com/parts Click on power tool parts store, click on repair parts catalog, click on model and then from there do a search for a 16" scroll saw in the search box. Good luck. __________________ Dave "Tight's tight, too tight's broken" www.lakeviewscrollsawing.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-12-2007, 09:27 PM	#3
Mick Walker Senior Member Join Date: Jan 2005 Location: Janesville, WI Posts: 1,335	mtcarver, check with Rick at www.scrollsaws.com. He may be able to help you find them. __________________ Mick, - Delta P-20 The future ain't what it used to be.

12-12-2007, 09:28 PM	#4
earlinjax Senior Member Join Date: Mar 2005 Location: Jacksonville, FL Posts: 558	I had some similar to that on my first saw - Ryobi. There is still one lost in the garage but we have moved. Maybe the new owner found it. Those kind of holders can get very frustrating. Good luck. Earl

12-16-2007, 12:16 AM	#6
daveswoodworking Member Join Date: Nov 2007 Location: iowa Posts: 53	i have some of them

12-17-2007, 06:55 PM	#7
mtcarver Member Join Date: Dec 2007 Location: Wise Va Posts: 40	What would you take for a set?