Flexible Dust Blower - Scroll Saw Woodworking & Crafts Message Board

shinzam · 04-02-2007, 08:34 AM

HI All

The dewalt 788 scroll saw has a flexible dust blower which is a far better system that I have. does any one know where I can purchase one? (over the internet is ok).

Regards shinzam.

CanadianScroller · 04-02-2007, 01:21 PM

A friend of mine made his own flexible dust blower.
He went to a craft store and purchased the same material used by the saw companies. It is made for pose-able dolls.
You could also use the spout from a flexible oil can.

Marcel in Longueuil · 04-02-2007, 04:12 PM

I heard that it's also available in the automotive industry,

Look into your local NAPA or other similar supplier. (I think it was said it was in connection to the cooling system, but not sure)

Regards,
Marcel

shinzam · 04-03-2007, 02:43 PM

Hi All
I have managed to order the dust blower from Dewalt parts
DW788
Part name Nozzle blower
Item No 68
Part No 286311-00
the cost was £15.00
you can order it from any dewalt parts dealer, you log onto the Dewalt web site and ask for your local parts dealer and they will send you a list.

Thanks Graham
Keep on scrolling.

04-02-2007, 08:34 AM	#1
shinzam Senior Member Join Date: Nov 2006 Location: livingston scotland Posts: 173	Flexible Dust Blower HI All The dewalt 788 scroll saw has a flexible dust blower which is a far better system that I have. does any one know where I can purchase one? (over the internet is ok). Regards shinzam.

04-02-2007, 01:21 PM	#2
CanadianScroller Moderator CUT IT OUT Join Date: Feb 2005 Location: Chilliwack British Columbia, Canada Posts: 3,937 Blog Entries: 12	A friend of mine made his own flexible dust blower. He went to a craft store and purchased the same material used by the saw companies. It is made for pose-able dolls. You could also use the spout from a flexible oil can. __________________ CAЯL HIRD-RUTTEЯ "proud member of the best scroll sawing forum on the net." Ryobi SC180VS scroll saw EX21

04-02-2007, 04:12 PM	#3
Marcel in Longueuil Gone to the Dark Side Join Date: Mar 2006 Location: Québec, Canada Posts: 1,131	I heard that it's also available in the automotive industry, Look into your local NAPA or other similar supplier. (I think it was said it was in connection to the cooling system, but not sure) Regards, Marcel __________________ http://marleb.com DW788. -Have fun in the shop or it isn't a hobby anymore. NOTE: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dust blower tube	DAdams	Beginners Scroll Saw	11	07-31-2008 04:31 AM
Looking for a dust blower for Delta 40-601	refueler1	General Scroll Saw	13	04-24-2007 10:30 PM
Saw dust	JoeCool	General Scroll Saw	26	12-03-2006 11:57 PM
Dremel Model 1680, 'sawdust blower issue'	IRMSRUS	Tools and Blades	12	10-04-2006 04:17 AM
Two more per request - failing blower	Minnesota scroller	General Scroll Saw	15	08-25-2006 04:13 AM

04-03-2007, 02:43 PM	#4
shinzam Senior Member Join Date: Nov 2006 Location: livingston scotland Posts: 173	Hi All I have managed to order the dust blower from Dewalt parts DW788 Part name Nozzle blower Item No 68 Part No 286311-00 the cost was £15.00 you can order it from any dewalt parts dealer, you log onto the Dewalt web site and ask for your local parts dealer and they will send you a list. Thanks Graham Keep on scrolling.