Delta 40-570 - Scroll Saw Woodworking & Crafts Message Board

Jim8Mad · 04-01-2007, 01:26 AM

I have the opportunity to buy a used Delta 40-570 and would like some feedback from other Delta owners who may have used this model. It looks just like the SS350 as far as I can tell. I did some searching on the internet for some reviews and they seem to be mixed. Some people (for magazine reviews) say it's a good saw, and others (scrollsawyers like us) say it vibrates too much and is a bit noisy. I know Delta makes quality saws and there are a lot of satisfied owners, but if there is anybody out there who has some experience with this model and can share some info I would really appreciate it.

Mick Walker · 04-01-2007, 10:28 PM

Jim, the model 40-570 is the SS350. Try www.scrollsaws.com. Rick may be able to give you some good advice. I have the next model up from the 350 and love it, the P-20. I have looked at the 350 in stores and it seems to have a small table. Depends on what you want to saw, if you plan on using it a lot I would go for the P-20 which is just under $500. The P-20 is about twice as heavy as the 350 and you won't get the vibration you get on the smaller saws. Good luck with which ever saw you choose.

04-01-2007, 01:26 AM	#1
Jim8Mad Senior Member Join Date: Apr 2006 Location: Hemet, CA Posts: 355	Delta 40-570 I have the opportunity to buy a used Delta 40-570 and would like some feedback from other Delta owners who may have used this model. It looks just like the SS350 as far as I can tell. I did some searching on the internet for some reviews and they seem to be mixed. Some people (for magazine reviews) say it's a good saw, and others (scrollsawyers like us) say it vibrates too much and is a bit noisy. I know Delta makes quality saws and there are a lot of satisfied owners, but if there is anybody out there who has some experience with this model and can share some info I would really appreciate it. __________________ Jim DeWalt DW788 & Dremel 1680

04-01-2007, 10:28 PM	#2
Mick Walker Senior Member Join Date: Jan 2005 Location: Janesville, WI Posts: 1,335	Jim, the model 40-570 is the SS350. Try www.scrollsaws.com. Rick may be able to give you some good advice. I have the next model up from the 350 and love it, the P-20. I have looked at the 350 in stores and it seems to have a small table. Depends on what you want to saw, if you plan on using it a lot I would go for the P-20 which is just under $500. The P-20 is about twice as heavy as the 350 and you won't get the vibration you get on the smaller saws. Good luck with which ever saw you choose. __________________ Mick, - Delta P-20 The future ain't what it used to be.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Delta 40-570	lliv018	Beginners Scroll Saw	12	08-24-2006 01:41 AM
delta p-20	barnja	Tools and Blades	6	06-01-2006 10:07 AM
Delta...not the saw	Trout	Off Topic	3	05-22-2006 05:56 AM
the ss 250 Delta #121 Grommet	DAdams	Beginners Scroll Saw	9	01-26-2006 08:38 PM
Delta SS250 verses Delta SS350	harrisg	Beginners Scroll Saw	3	11-28-2005 07:47 AM