need logo sigh - Scroll Saw Woodworking & Crafts Message Board

Trackman · 07-11-2012, 09:05 PM

The people on the business forum on this web site came up with some great ideas for the name of my business. Now it is you pattern makers that I need help from.

I would like a pattern that I could use to make a sign to hang at shows. I am using the name DW's Woodcrafts. The DW is for my name, Delvaughn Willis.

I don't have any logo in mind so I could use the help. Thanks

Birchbark · 07-14-2012, 12:04 PM

Hello Trackman, i could and would gladly help you on this request. The only problem is that if i spend hours on an idea, and you don't like it, and it isn't anything like you had in mind, I have wasted that time for no reason except to help you decide what you dont want... If you have a direction you would like to go, or a sigh you have seen and like the style of that might help us come up with something you will actually use. If you post a few pictures of some ideas that you like someone will be more likely to give it a go. I'm sure you wouldn't want anyone to sit for hours and work on something you don't like, a little direction would get a few more replies i am guessing.
Russell

Trackman · 07-14-2012, 01:00 PM

Birchbark you are very right an I see what you are saying. I didn't think about the time it takes to come up with ideas an than make the pattern.
The trouble is I don't know what I want for sure. Was thinking maybe a sign that has the words DWs Woodcrafts in a circle an a scroll saw in the middle.

Think you very much for pointing out why I haven't gotten any replies.

tdub4ever · 07-15-2012, 03:06 AM

Will this work for you Trackman? Borrowed the scroller from a Steve Good pattern. Thanks Steve!!! Don

Forester · 07-15-2012, 06:39 AM

Nice one Don.

Mayo Farmer · 07-15-2012, 07:57 AM

Good job Don. Nice work on the website too - your prices look very reasonable.

Good Luck

Trackman · 07-15-2012, 12:29 PM

Thank you very much tdub4ever! That will work for me. Don't know when I will get one cut. The wife has me remodeling the bathroom so I haven't had much time in the shop. When I get one done I will look you up to let you see it. Thanks again!

tdub4ever · 07-15-2012, 06:13 PM

Thanks Mayo! Any suggestions from anyone that would make my site better would be more than appreciated!! Don

07-11-2012, 09:05 PM	#1
Trackman Senior Member Join Date: Apr 2011 Location: Winchester, IN Posts: 183 Thanks: 0 Thanked 2 Times in 2 Posts	need logo sigh The people on the business forum on this web site came up with some great ideas for the name of my business. Now it is you pattern makers that I need help from. I would like a pattern that I could use to make a sign to hang at shows. I am using the name DW's Woodcrafts. The DW is for my name, Delvaughn Willis. I don't have any logo in mind so I could use the help. Thanks

07-15-2012, 06:39 AM	#5
Forester Senior Member Join Date: Dec 2011 Posts: 148 Thanks: 8 Thanked 5 Times in 5 Posts	Nice one Don. __________________ Learning the art of scroll saw.

07-15-2012, 07:57 AM	#6
Mayo Farmer Normal Member Join Date: May 2010 Location: Ireland Posts: 559 Thanks: 104 Thanked 21 Times in 20 Posts	Good job Don. Nice work on the website too - your prices look very reasonable. Good Luck __________________ Experience is something you don't get until just after you need it.

07-15-2012, 06:13 PM	#8
tdub4ever Tdub "The End Of An Era" Join Date: Sep 2010 Location: O.P. Kansas Posts: 559 Thanks: 1 Thanked 8 Times in 7 Posts	Thanks Mayo! Any suggestions from anyone that would make my site better would be more than appreciated!! Don __________________ Don

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2012, 12:04 PM	#2
Birchbark Senior Member Join Date: Feb 2011 Location: North Central Ohio Posts: 269 Thanks: 12 Thanked 39 Times in 31 Posts	Hello Trackman, i could and would gladly help you on this request. The only problem is that if i spend hours on an idea, and you don't like it, and it isn't anything like you had in mind, I have wasted that time for no reason except to help you decide what you dont want... If you have a direction you would like to go, or a sigh you have seen and like the style of that might help us come up with something you will actually use. If you post a few pictures of some ideas that you like someone will be more likely to give it a go. I'm sure you wouldn't want anyone to sit for hours and work on something you don't like, a little direction would get a few more replies i am guessing. Russell

07-14-2012, 01:00 PM	#3
Trackman Senior Member Join Date: Apr 2011 Location: Winchester, IN Posts: 183 Thanks: 0 Thanked 2 Times in 2 Posts	Birchbark you are very right an I see what you are saying. I didn't think about the time it takes to come up with ideas an than make the pattern. The trouble is I don't know what I want for sure. Was thinking maybe a sign that has the words DWs Woodcrafts in a circle an a scroll saw in the middle. Think you very much for pointing out why I haven't gotten any replies.

07-15-2012, 12:29 PM	#7
Trackman Senior Member Join Date: Apr 2011 Location: Winchester, IN Posts: 183 Thanks: 0 Thanked 2 Times in 2 Posts	Thank you very much tdub4ever! That will work for me. Don't know when I will get one cut. The wife has me remodeling the bathroom so I haven't had much time in the shop. When I get one done I will look you up to let you see it. Thanks again!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LOGO Help	WoodCarverOH	Scroll Saw Pattern Requests	9	07-21-2012 01:48 AM
Logo help	Don in Brooklin On	Scroll Saw Pattern Requests	4	07-10-2011 02:32 PM
broken saw (sigh)	mrsippi007	Welcome Members	4	09-16-2009 04:07 PM
yet another senior moment......sigh	pete00	Off Topic	2	11-06-2006 12:52 AM