Tooth pick holder - Scroll Saw Woodworking & Crafts Message Board

campasano · 10-08-2009, 04:30 PM

I am looking for a tooth pattern to hold toothpicks, any help would be appreciated. I remember seeing one awhile back but do not remember if it was on this site, Thanks.

Mike

Wood Dog · 10-09-2009, 12:33 AM

Check out this site Mike, may be the one you are looking for under novelties http://scrollsawpatternsunlimited.co...tegories.shtml

campasano · 10-09-2009, 12:43 AM

WD, that is what I was looking for, thank you for the link, I will order the plan.

Mike

normded · 10-10-2009, 04:29 AM

hi Mike i just did a compound cut from cwc and then read your post so i decided to try and make a pattern for the toothpick holder. it looks silly but i cut just the out line and it worked gave me an idea to paint it white and put the googly eyes that john b. always uses. use it if you want. i drilled the center hole first with a forstner bit then cut it out.

Jerry

frieke · 10-10-2009, 08:26 PM

Hello Jerry,

When i want draw ornaments myself, howmany place ( in millimetres) do i have to stay
from the corner? I use inkscape for drawing and gimp for patterns

thanks,

Frieke

Wood Dog · 10-11-2009, 02:05 AM

Merle the telephone number is registered to John & Sheila Polhemus, so I assume it is their site.

normded · 10-11-2009, 02:30 PM

I just made the rectangle the size of wood i wanted then just hit center and the pattern atomatically centers it. i never made a compound pattern before but i cut it and it worked. i used corel draw

Jerry

frieke · 10-11-2009, 07:09 PM

Thanks Jerry,

Another challenge now i have, try to draw ornaments, looks funny...

Frieke

Ramjet · 10-11-2009, 09:50 PM

If you have a copy of Creative woodworks and Crafts issue june 2004 you''ll find a tooth pick holder .

It is pretty much as Jerry's pattern .

With a little imagination you could make a Tooth Brush holder out of the pattern .

Cheers .
Rpger

10-08-2009, 04:30 PM	#1
campasano Senior Member Join Date: Oct 2007 Location: Citrus Heights,Ca. Posts: 505	Tooth pick holder I am looking for a tooth pattern to hold toothpicks, any help would be appreciated. I remember seeing one awhile back but do not remember if it was on this site, Thanks. Mike

10-09-2009, 12:33 AM	#2
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,449	Check out this site Mike, may be the one you are looking for under novelties http://scrollsawpatternsunlimited.co...tegories.shtml __________________ WD Last edited by Wood Dog; 10-09-2009 at 12:38 AM.

10-11-2009, 02:05 AM	#6
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,449	Merle the telephone number is registered to John & Sheila Polhemus, so I assume it is their site. __________________ WD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-09-2009, 12:43 AM	#3
campasano Senior Member Join Date: Oct 2007 Location: Citrus Heights,Ca. Posts: 505	WD, that is what I was looking for, thank you for the link, I will order the plan. Mike

10-10-2009, 08:26 PM	#5
frieke Senior Member Join Date: Aug 2009 Location: Belgium, Putte Posts: 103	Hello Jerry, When i want draw ornaments myself, howmany place ( in millimetres) do i have to stay from the corner? I use inkscape for drawing and gimp for patterns thanks, Frieke

10-11-2009, 02:30 PM	#7
normded Senior Member Join Date: Nov 2008 Posts: 266	I just made the rectangle the size of wood i wanted then just hit center and the pattern atomatically centers it. i never made a compound pattern before but i cut it and it worked. i used corel draw Jerry

10-11-2009, 07:09 PM	#8
frieke Senior Member Join Date: Aug 2009 Location: Belgium, Putte Posts: 103	Thanks Jerry, Another challenge now i have, try to draw ornaments, looks funny... Frieke

10-11-2009, 09:50 PM	#9
Ramjet Senior Member Join Date: Feb 2008 Location: Saltspring Island B.C. Canada Posts: 1,096	If you have a copy of Creative woodworks and Crafts issue june 2004 you''ll find a tooth pick holder . It is pretty much as Jerry's pattern . With a little imagination you could make a Tooth Brush holder out of the pattern . Cheers . Rpger