Just need to vent....

[JoelM]

I haven't had much time to play with the saw lately, as we've been putting in a lot of hours at work the last few months and by the time I get home and get things done around the house and get some dinner, it's late and I'm tired.
Today I finally had some time, so I started cutting one of JZ's cheetah patterns that I've been wanting to do, after about 4 hours of working on it, 2 of the little blades of grass on the bottom of the portrait broke off! I found them and I'm hoping they can be glued back on, but it's a little frustrating to say the least.

I was going to start Kevin's "Midnight Serenity" pattern tomorrow, hopefully I won't hack that one up too, that's a really cool pattern.
Sorry for the whining, there's just no one here to yell at at the moment.

[guitarman]

Joel, I know how you feel buddy. Myself and I'm sure many others here go through that from time to time. Don't feel alone with it. You did good writing about it here. I hope it helped you feel a little better. David

[MikeDingas]

I haven't attempted one of JZ's patterns for that reason; too detailed. It only takes a small slip in concentration and your p_ssed. I figure I need more experience so I stick to simpler patterns to gain confidence and skill. Stick with it and mistakes will become fewer and fewer.

[Minnesota scroller]

Been there, done that. Yes, it's frustrating but it's not the end. Get back in the saddle and give it another shot. After having this happen a couple times, I proceeded to modify the pattern a little to remedy the trouble spots. There is no law on the books that says you can't make changes to a pattern before or while cutting. If it appears to be too narrow a gate, chances are, you can make it a little wider with none the wiser.

Good luck.

[ChuckD]

I have changed the pattern more than once. Every time you get ready to thread the blade into a new hole, plan your cut. More times than I should admit two blades of grass became one, or the space between whiskers became wider. The funny part of this, most of the time the only person, besides you of course, who would notice this would be the designer and I have not heard very many, if any, come back to say "Ah ha gotcha, you coward"

[Mick Walker]

Joel, just remember, glue is a scroller's best friend. What I don't like is a small piece breaking off and I can't find it.I believe anyone that scrolls has had the same problem. I have cut 3 of Jeff's patterns and they are challenging.

[Rolf]

You Don't need No stinking grass
Just kidding, just remmeber the end result is YOUR interpretation of the pattern.
Having done some of Jeff Z's stuff I do it in increments. I do a few quick projects here and ther just to get away from total concentration now and then.
Remmember this is supposed to be fun.

[Minnesota scroller]

Originally Posted by Mick Walker

I have cut 3 of Jeff's patterns and they are challenging.

I have cut just one of his, and that was one of the easier ones. Personally, I prefer to cut Charles Dearing's. His are good and much less stressful.

[DukeNukem]

Joel, Ive cut both of them and the very last thing you should cut on them is the grassy area good on on the gluing hope it works.Jerry

[JoelM]

Thanks for the responses guys. I'm a lot calmer now, it was just a little maddening to see those little pieces hit the floor after the project was 90% finished. I understand that those things are going to happen, I just don't like to see it happen.

For some reason, I'm very drawn to the really detailed patterns. I have a personality type that wants to jump right in with both feet and try to tackle the more difficult things before I probably should. People have been telling me for as long as I can remember, you have to walk before you run, but it never seems to sink in.

I like Rolf's suggestion of doing them in increments instead of trying to do it all at once. If it isn't fun, what's the point, right?