What am I doing wrong ? - Scroll Saw Woodworking & Crafts Message Board

littlepig · 07-30-2011, 04:38 PM

Dumb as a rock with this computer!!! Trying to print some of these great patterns. But they print real small. What am I doing wrong?

I moved your thread to a more appropriate forum to maximize traffic and get you more responses to your question.

Scrolling Days · 07-30-2011, 05:09 PM

Hi, Littlepig. I'm sure somebody here will have your answer.

Might I suggest you post your question in the Message Board FAQ area, or the Pattern Vault area.....you'll likely get better responses that way. If all else fails, PM one of the mods, or Bob Duncan, and they can probably point you in the right direction.

Jan · 07-30-2011, 07:07 PM

When you give the print command, do you get a window that gives you the option for size and orientation of the print? If so, you may be able to change the size of the print-out to the desired size and orientation. Good luck.

Jan

ekmouse · 07-30-2011, 07:15 PM

Are you right clicking on the picture in the post and then selecting print picture? Try clicking on the picture to open it and "save" it to a location on your pc. Then open the picture/pattern and print.

--Ekmouse

07-30-2011, 04:38 PM	#1
littlepig Junior Member Join Date: Jul 2011 Posts: 29 Thanks: 0 Thanked 0 Times in 0 Posts	What am I doing wrong ? Dumb as a rock with this computer!!! Trying to print some of these great patterns. But they print real small. What am I doing wrong? *I moved your thread to a more appropriate forum to maximize traffic and get you more responses to your question.* Last edited by wood-n-things; 07-30-2011 at 05:26 PM.

07-30-2011, 05:09 PM	#2
Scrolling Days Iron Man Join Date: Jan 2009 Location: Out fighting bad guys Posts: 3,177 Blog Entries: 5 Thanks: 42 Thanked 96 Times in 81 Posts	Hi, Littlepig. I'm sure somebody here will have your answer. Might I suggest you post your question in the Message Board FAQ area, or the Pattern Vault area.....you'll likely get better responses that way. If all else fails, PM one of the mods, or Bob Duncan, and they can probably point you in the right direction. __________________ Shawn Ferguson Come visit at The Ferguson Puzzle Company !

07-30-2011, 07:15 PM	#4
ekmouse Senior Member Join Date: Sep 2010 Location: Virginia Posts: 122 Thanks: 0 Thanked 2 Times in 1 Post	Are you right clicking on the picture in the post and then selecting print picture? Try clicking on the picture to open it and "save" it to a location on your pc. Then open the picture/pattern and print. --Ekmouse __________________ Audry Hepburn - Nothing is impossible, the word itself says 'I'm possible'!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What am I doing wrong - help	RegisG	Beginners Scroll Saw	9	11-18-2011 01:29 AM
Don't take this the wrong way......	Pete_M	Scroll Saw Puzzles	10	06-17-2009 11:20 AM
What's wrong with this box?	brucio	Scroll Saw Puzzles	11	04-11-2009 02:08 PM
What am doing wrong?	Anneh	Tools and Blades	9	03-16-2009 09:41 PM
What am I doing wrong	jttheclockman	Message Board FAQ, Suggestions and Feedback	1	12-28-2004 12:15 PM

07-30-2011, 07:07 PM	#3
Jan Senior Member Join Date: Apr 2009 Location: Southwest Florida Posts: 2,483 Thanks: 11 Thanked 27 Times in 26 Posts	When you give the print command, do you get a window that gives you the option for size and orientation of the print? If so, you may be able to change the size of the print-out to the desired size and orientation. Good luck. Jan