Trying to identify a pattern - Scroll Saw Woodworking & Crafts Message Board

dragyn · 09-21-2009, 09:18 PM

Hi folks.

Well the title says it all. I had a water heater meltdown in my basement where the shop is and the cabinet where my patterns were stored got soaked. It was up off the ground, but on a stand made with that wonderful stuff called particle board. You guessed it, the water soaked into it, the particleboard crumbled and down came the cabinet. Anyway. Got things cleaned up and a new water heater installed and I have tried to dry out all the patterns I could save from the cabinet.

There is a horse pattern that I can not find in my collection and is probably one of the 4 - 5 patterns that I could not salvage because they just got too soaked. I know I had because I made the piece below about 1 1/2 years ago. Can some one tell me whose pattern it is so I can order a replacement?

This has just not been a good time for me lately, but I keep trying to look up.

Thanks for any help and know that I appreciate each and every one of you.

wood-n-things · 09-21-2009, 09:24 PM

Sorry for your latest troubles. I don't have a clue who made the pattern but you did it justice.

Pete Ricci · 09-21-2009, 09:35 PM

I also am sorry for your troubles. I can tell you that pattern is not a Judy Gale Roberts pattern.
Hope that helps. Keep your chin up it could always be worse.
Pete

minowevie · 09-21-2009, 11:40 PM

Gosh Mike, I can't think of anything worse then losing your patterns. sorry , I don't know the pattern, but have seen it, I will look around for you, seams like it was in a magazine. what other patterns did you loose?
your friend Evie

maurvz800@aol.com · 09-22-2009, 12:58 AM

Dragyn,I came across that exact piece doing a web search for "Horse Intarsia'-not sure if it is his patt,or somone else's,but he would know where its from. Ray Luckhaupt Wood Art - Intarsia Hope this helps you. -Andy

dragyn · 09-22-2009, 01:31 AM

Thanks everyone. Andy, thanks for the lead, I have sent an email off to Ray.

Evie; I knew this one was missing, because I had a request for one and looked through the wet and dry patterns I saved and couldn't find it in that group. I believe I am also missing unicorn and stallion patterns,, but I know where those are from JGR. Velum paper does not like water very much!

minowevie · 09-22-2009, 02:15 AM

Mike, do you think you could make a pattern from this cutting, or the picture of the cutting?????? I would give that a try. hope you find who did it. and I will keep looking. your friend Evie

lucky788scroller · 09-22-2009, 03:34 AM

That horse is on the cover of a past issue of either SSWC or CWWC.

edit!
AUG. 2003 CWWC issue

Cutting Cathy · 09-22-2009, 04:36 AM

Hey Mike, So sorry for your problems!!! I think that is on the cover of the August 2003 CWWC. My magazines are out in the shop but I will go look first thing in the morning to see if I have that issue. Then I can find out who's pattern it is.

jlyn069 · 09-22-2009, 07:09 AM

Hi,
It is called Draft Horse Intarsia and it is on the cover of 2003 CWWC magazine August. I can't find my issue but found it on their website and you can order that back issue.
Good Luck
Jackie

09-21-2009, 09:24 PM	#2
wood-n-things Behave Yourself..I can't. Join Date: Nov 2005 Location: Right here ---silly Posts: 4,478 Blog Entries: 1	Sorry for your latest troubles. I don't have a clue who made the pattern but you did it justice. __________________ The Mike One of them anyway. Don't be so open-minded. Your brains will fall out!

09-22-2009, 01:31 AM	#6
dragyn Local Goofball! Join Date: Jan 2009 Posts: 1,669	Thanks everyone. Andy, thanks for the lead, I have sent an email off to Ray. Evie; I knew this one was missing, because I had a request for one and looked through the wet and dry patterns I saved and couldn't find it in that group. I believe I am also missing unicorn and stallion patterns,, but I know where those are from JGR. Velum paper does not like water very much! __________________ Dragyn (Oh my! Another Mike! ) It's a good thing my head is attached to my ... ... Has anyone seen my head?!?

09-22-2009, 03:34 AM	#8
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,261	That horse is on the cover of a past issue of either SSWC or CWWC. edit! AUG. 2003 CWWC issue __________________ Dale w/ yella saws Last edited by lucky788scroller; 09-22-2009 at 03:37 AM. Reason: found correct place

09-22-2009, 04:36 AM	#9
Cutting Cathy Proud Grandma Join Date: Oct 2006 Location: Central Nebraska Posts: 565	Hey Mike, So sorry for your problems!!! I think that is on the cover of the August 2003 CWWC. My magazines are out in the shop but I will go look first thing in the morning to see if I have that issue. Then I can find out who's pattern it is. __________________ Cathy in NE "While we try to teach our children all about life, our children teach us what life is all about." - Anonymous

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-21-2009, 09:35 PM	#3
Pete Ricci Senior Member Join Date: Nov 2008 Location: Akron, Ohio Posts: 192	I also am sorry for your troubles. I can tell you that pattern is not a Judy Gale Roberts pattern. Hope that helps. Keep your chin up it could always be worse. Pete

09-21-2009, 11:40 PM	#4
minowevie Senior Member Join Date: Nov 2005 Location: california Posts: 6,398	Gosh Mike, I can't think of anything worse then losing your patterns. sorry , I don't know the pattern, but have seen it, I will look around for you, seams like it was in a magazine. what other patterns did you loose? your friend Evie

09-22-2009, 12:58 AM	#5
maurvz800@aol.com Member Join Date: Nov 2008 Location: Upstate NY Posts: 70	Dragyn,I came across that exact piece doing a web search for "Horse Intarsia'-not sure if it is his patt,or somone else's,but he would know where its from. Ray Luckhaupt Wood Art - Intarsia Hope this helps you. -Andy

09-22-2009, 02:15 AM	#7
minowevie Senior Member Join Date: Nov 2005 Location: california Posts: 6,398	Mike, do you think you could make a pattern from this cutting, or the picture of the cutting?????? I would give that a try. hope you find who did it. and I will keep looking. your friend Evie

09-22-2009, 07:09 AM	#10
jlyn069 Jackie Join Date: May 2009 Location: Michigan Posts: 202	Hi, It is called Draft Horse Intarsia and it is on the cover of 2003 CWWC magazine August. I can't find my issue but found it on their website and you can order that back issue. Good Luck Jackie