Hook and loop sandpaper jig - Scroll Saw Woodworking & Crafts Message Board

campasano · 08-03-2009, 09:51 PM

you can use this jig to line up your sanding paper and sander perfectly every time without misalignment' It can be used for 6" disc with 5 or 8 holes, If your sander uses 5 hole paper insert the pegs into the hokes that specify 5 or the 5/8 combination. On your 8 hole insert the pegs only in the holes that specify 8 or again the 5/8 hole combination. It works every time without the fraustration of having to remove the disc time and again to line up the holes.

Mike

Greenfield_Bob · 08-04-2009, 12:09 AM

I just saw one of these on Ask This Old House.

Bob

campasano · 08-04-2009, 04:15 AM

yes Bob I saw it also, it was round and came on a few weeks after I made mine. I don't know if his was for a combination of 5 and 8 hole sanding disc. If I remember correctly John B made something similar for a blind friend or relative, He posted it about 6 months or so ago, John if you read this post please refreash my memory.
Mike

08-04-2009, 12:09 AM	#2
Greenfield_Bob Senior Member Join Date: Jan 2004 Location: Greenfield Indiana Posts: 1,534	I just saw one of these on Ask This Old House. Bob __________________ Delta P-20 & Q-3 Ever notice that anyone going slower than you is an idiot, but anyone going faster than you is a maniac?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-04-2009, 04:15 AM	#3
campasano Senior Member Join Date: Oct 2007 Location: Citrus Heights,Ca. Posts: 575	yes Bob I saw it also, it was round and came on a few weeks after I made mine. I don't know if his was for a combination of 5 and 8 hole sanding disc. If I remember correctly John B made something similar for a blind friend or relative, He posted it about 6 months or so ago, John if you read this post please refreash my memory. Mike