clock types - Scroll Saw Woodworking & Crafts Message Board

texaswoodworker · 07-06-2009, 04:52 AM

I was planning on making some clocks that require 1 7/16" inserts and on woodenteddybear.com they have two types of inserts, economy and standard. the economy inserts are $4.55 and the standard inserts are $5.25 to $5.95. Which would you recommend.

thanks

sawdustus · 07-06-2009, 12:16 PM

You generally get what you pay for Aaron. I always use the standard ones.

george

lucky788scroller · 07-06-2009, 02:00 PM

If your after one time customers, use the economy. If you hope to keep a customer for life,or hope to have customers recommend you to others, use the standard ones.For the amount of time involved in the project,you want your hardware to be of a good quality.

texaswoodworker · 07-06-2009, 05:03 PM

Thanks, standard it is.

07-06-2009, 04:52 AM	#1
texaswoodworker Member Join Date: Apr 2009 Location: Reno Texas Posts: 254	clock types I was planning on making some clocks that require 1 7/16" inserts and on woodenteddybear.com they have two types of inserts, economy and standard. the economy inserts are $4.55 and the standard inserts are $5.25 to $5.95. Which would you recommend. thanks __________________ Aaron

07-06-2009, 12:16 PM	#2
sawdustus Senior Member Join Date: Jun 2006 Location: New Jersey Posts: 1,975	You generally get what you pay for Aaron. I always use the standard ones. george __________________ A day without sawdust is a day without sunshine. George delta 650, hawk G426

07-06-2009, 02:00 PM	#3
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,260	If your after one time customers, use the economy. If you hope to keep a customer for life,or hope to have customers recommend you to others, use the standard ones.For the amount of time involved in the project,you want your hardware to be of a good quality. __________________ Dale w/ yella saws

07-06-2009, 05:03 PM	#4
texaswoodworker Member Join Date: Apr 2009 Location: Reno Texas Posts: 254	Thanks, standard it is. __________________ Aaron

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode