Shop Vac hose clamp - Scroll Saw Woodworking & Crafts Message Board

Haggard3230 · 05-01-2009, 01:26 AM

Came up with this today for holding my shop vac hose while drilling. It is from an old portable hooded light fixture, it works great if you get some of the weight off the hose.

wood-n-things · 05-01-2009, 01:42 AM

Nice work around.....You are always coming up with something inventive and inexpensive. Thanks for sharing.

Wood Dog · 05-01-2009, 02:08 AM

Sweeeet idea Merle thanks for posting it.

miniwoodworker · 05-01-2009, 12:59 PM

That's a great idea. I can easily see other applications, such as clamping to a fence while table routing. Or, setting up for the dust from grinding with a Dremel mounted in the Workstation.

Thanks for sharing.

Haggard3230 · 05-02-2009, 02:17 AM

Thanks. Yeppers lots of uses. I don't have my dust collection system set up yet so I have to figure out different things. At least my 66 year old noggin is still working some.

05-01-2009, 01:42 AM	#2
wood-n-things Behave Yourself..I can't. Join Date: Nov 2005 Location: Right here ---silly Posts: 4,471 Blog Entries: 1	Nice work around.....You are always coming up with something inventive and inexpensive. Thanks for sharing. __________________ The Mike One of them anyway. Don't be so open-minded. Your brains will fall out!

05-01-2009, 02:08 AM	#3
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,445	Sweeeet idea Merle thanks for posting it. __________________ WD

05-01-2009, 12:59 PM	#4
miniwoodworker Senior Member Join Date: May 2005 Posts: 497	That's a great idea. I can easily see other applications, such as clamping to a fence while table routing. Or, setting up for the dust from grinding with a Dremel mounted in the Workstation. Thanks for sharing. __________________ Lee in NC Als Ik Kan DW788 1975 Dremel (labeled Craftsman) Scroll saw w/3" pin blades

05-02-2009, 02:17 AM	#5
Haggard3230 Senior Member Join Date: Mar 2007 Location: Riverton, KS on Route 66 Posts: 2,714	Thanks. Yeppers lots of uses. I don't have my dust collection system set up yet so I have to figure out different things. At least my 66 year old noggin is still working some. __________________ Merle SSG US Army Retired. merlehobbs@yahoo.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode