Looking for cheap BASSWOOD? - Scroll Saw Woodworking & Crafts Message Board

bcarvings · 10-16-2004, 10:59 PM

Hi,
I recently obtained large amount of basswood. The basswood is air dried 1 year per thickness then kiln dried to a moisture content between 6-8%. All the basswood is perfectly clear, and there are NO knots, and NO defects of any kind! Bellow is how much the basswood costs. The measurements are in inches.
1x1x12= .50
2x2x12= $2
2x3x12= $2.50
4x4x12= $8
4x6x12= $12
Also I have a few two foot basswood blocks.
4x4x24= $16
4x6x24= $24
There is no minnimun order and to save on shipping you may come pick the wood up. E-mail me at bcarvings@verizon.net if you would like to purchase wood. Thank you

10-17-2004, 02:01 PM

$6.00 and bd. ft. = cheap? Been paying $4 to $4.50/bd ft fm my normal suppliers.

10-16-2004, 10:59 PM	#1
bcarvings Senior Member Join Date: Sep 2004 Location: Posts: 122	Looking for cheap BASSWOOD? Hi, I recently obtained large amount of basswood. The basswood is air dried 1 year per thickness then kiln dried to a moisture content between 6-8%. All the basswood is perfectly clear, and there are NO knots, and NO defects of any kind! Bellow is how much the basswood costs. The measurements are in inches. 1x1x12= .50 2x2x12= $2 2x3x12= $2.50 4x4x12= $8 4x6x12= $12 Also I have a few two foot basswood blocks. 4x4x24= $16 4x6x24= $24 There is no minnimun order and to save on shipping you may come pick the wood up. E-mail me at bcarvings@verizon.net if you would like to purchase wood. Thank you

10-17-2004, 02:01 PM	#2
plain_ol_ed Guest Posts: n/a	Re: Looking for cheap BASSWOOD? $6.00 and bd. ft. = cheap? Been paying $4 to $4.50/bd ft fm my normal suppliers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for cheap BASSWOOD?	bcarvings	Tools and Blades	10	10-18-2004 03:13 PM
Looking for cheap BASSWOOD?	bcarvings	General Carving	1	10-17-2004 01:53 PM
Where is Cheap Wood?	bcarvings	General Carving	13	09-15-2004 11:08 PM
cheap woodburner	Guest	Beginner	2	09-23-2003 02:20 AM