Ex-21 Vibration - Scroll Saw Woodworking & Crafts Message Board

Don in Brooklin On · 06-03-2012, 03:18 PM

Is there any vibration on your EX-21 when running at 100% full speed?

A fellow club member was compaining about vibration on his EX-21 and so I came home and tested mine. None at 3/4 but a slight at 100%. I am going down to see his this week and I wondered if anyone else runs at 100% and if any vibration.

It is only at the front not the back.

Thanks

Don

wood-n-things · 06-03-2012, 05:07 PM

I have a slight amount at 100% but I rarely run it full throttle.

Jan · 06-03-2012, 05:41 PM

What Mike said.

Jan

tvman44 · 06-03-2012, 09:37 PM

Same here, I usually run about 1/2 to 3/4 and I can stand a penny on edge and it stays on edge.

Quote:

Originally Posted by wood-n-things

I have a slight amount at 100% but I rarely run it full throttle.

Toneman · 06-04-2012, 12:49 PM

I run my EX 21 at about 3/4. I have tried 100%, but, too much vibration and figured it was because of wood floor. Don't think I could control 100% anyway!LOL. No vibration at all at 3/4 speed.

Tony,aka,Toneman

Northerner · 06-06-2012, 06:06 PM

same here, i run at 3/4 and have a pretty good amount of vibration at full throttle

unruliestgrump · 06-21-2012, 01:26 AM

what everybody else says --- still sure do like it ----- why 100%?

06-03-2012, 03:18 PM	#1
Don in Brooklin On Senior Member Join Date: Feb 2011 Location: Brooklin Ontario Posts: 153 Thanks: 1 Thanked 6 Times in 5 Posts	Ex-21 Vibration Is there any vibration on your EX-21 when running at 100% full speed? A fellow club member was compaining about vibration on his EX-21 and so I came home and tested mine. None at 3/4 but a slight at 100%. I am going down to see his this week and I wondered if anyone else runs at 100% and if any vibration. It is only at the front not the back. Thanks Don

06-03-2012, 05:07 PM	#2
wood-n-things Staying Positive Join Date: Nov 2005 Location: Hamilton, Montana Posts: 18,762 Thanks: 58 Thanked 398 Times in 297 Posts	I have a slight amount at 100% but I rarely run it full throttle. __________________ "Montana MIKE" There is a very fine line between “hobby” and “mental illness.” As You Slide Down the Banister of Life, Pray That All The Splinters Are Pointed The Other Way... "Don't worry about old age--it doesn't last that long." Mike's Wood-n-Things

06-06-2012, 06:06 PM	#6
Northerner Senior Member Join Date: Nov 2009 Location: South Dakota Posts: 234 Thanks: 0 Thanked 0 Times in 0 Posts	same here, i run at 3/4 and have a pretty good amount of vibration at full throttle __________________ + + I Love The Smell Of Sawdust In The Morning + +

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
vibration ?	littlepig	Tools and Blades	4	11-15-2011 02:45 PM
Vibration HELP	onewaywood	Beginners Scroll Saw	7	08-25-2011 11:27 PM
vibration	fpkingsnorth	Beginners Scroll Saw	2	03-14-2009 03:44 AM
vibration	kevin birrell	General Scroll Saw	3	04-19-2008 12:45 PM
Vibration?	Ira	General Scroll Saw	10	10-14-2007 03:06 AM

06-03-2012, 05:41 PM	#3
Jan Senior Member Join Date: Apr 2009 Location: Southwest Florida Posts: 2,494 Thanks: 11 Thanked 28 Times in 27 Posts	What Mike said. Jan

06-04-2012, 12:49 PM	#5
Toneman Senior Member Join Date: Jan 2012 Location: Paris, Texas Posts: 271 Thanks: 0 Thanked 9 Times in 9 Posts	I run my EX 21 at about 3/4. I have tried 100%, but, too much vibration and figured it was because of wood floor. Don't think I could control 100% anyway!LOL. No vibration at all at 3/4 speed. Tony,aka,Toneman

06-21-2012, 01:26 AM	#7
unruliestgrump Junior Member Join Date: Nov 2008 Location: Granbury, TX Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	what everybody else says --- still sure do like it ----- why 100%?