Snowmen - Scroll Saw Woodworking & Crafts Message Board

Croaker · 10-12-2009, 10:31 AM

These are cut from bb ply 1/8" enlarged to 175% plced on 2/4 pine coated with snow tex stained with golden oak and cut with a Olson # 2 blade.
They are made for the desk rather than the tree guess a peson could hang them if they wanted our tree is little small I think .
Thanks for looking and leaving comments if you like. Either way good or bad Have large shoulders and can take the heat . After in Nebraska we had snow trhis weekend only maybe a 1" but that is still snow and a big mess,course the cold came along for a ride one can t come without the other.
Thanks again Jerry

nzmerlin · 10-12-2009, 10:54 AM

Very nice Jerry, very nice

Merlin

SNAPPER · 10-12-2009, 10:56 AM

Nice indeed.
Dean

SkipTooth · 10-12-2009, 11:56 AM

Those look great! I wouldn't change anything at all.
-SkipTooth

Paladin · 10-12-2009, 12:16 PM

Nice adaptation. I was cutting those same three patterns this weekend. I left them alone and cut them as ornaments out of 1/4" aspen, though.

Kepy · 10-12-2009, 12:42 PM

Neat idea. If you want to avoid buying Snowtex, try mixing some sawdust with white paint. I imagine you have some sawdust available.

wood-n-things · 10-12-2009, 12:52 PM

Great job..Where are those patterns available..I've seen them somewhere...

34natl · 10-12-2009, 01:17 PM

Jerry, those look fantastic.Great job
Mike

KtownScroller · 10-12-2009, 01:32 PM

I like your snowmen Jerry. Nice touch with the fake snow!

Wood Dog · 10-12-2009, 04:00 PM

Sweeeeet project.....love the base idea.

10-12-2009, 10:54 AM	#2
nzmerlin ScrollSaw Artist Join Date: Nov 2007 Location: Foxton, NewZealand Posts: 162	Very nice Jerry, very nice Merlin __________________ Try not! Do, or do not There is no try Yoda "Empire Strikes Back" 1980

10-12-2009, 12:52 PM	#7
wood-n-things Behave Yourself..I can't. Join Date: Nov 2005 Location: Right here ---silly Posts: 4,471 Blog Entries: 1	Great job..Where are those patterns available..I've seen them somewhere... __________________ The Mike One of them anyway. Don't be so open-minded. Your brains will fall out!

10-12-2009, 01:32 PM	#9
KtownScroller So much better :) Join Date: Nov 2008 Location: PA Posts: 2,662	I like your snowmen Jerry. Nice touch with the fake snow! __________________ - Rick

10-12-2009, 04:00 PM	#10
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,445	Sweeeeet project.....love the base idea. __________________ WD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-12-2009, 10:56 AM	#3
SNAPPER Dino Join Date: Oct 2007 Location: Fergus Falls,MN Posts: 821	Nice indeed. Dean

10-12-2009, 11:56 AM	#4
SkipTooth Junior Member Join Date: Sep 2009 Location: Missouri Posts: 11	Those look great! I wouldn't change anything at all. -SkipTooth

10-12-2009, 12:16 PM	#5
Paladin Member Join Date: Aug 2007 Posts: 53	Nice adaptation. I was cutting those same three patterns this weekend. I left them alone and cut them as ornaments out of 1/4" aspen, though.

10-12-2009, 12:42 PM	#6
Kepy Senior Member Join Date: Feb 2004 Location: Elkland, MO Posts: 120	Neat idea. If you want to avoid buying Snowtex, try mixing some sawdust with white paint. I imagine you have some sawdust available.

10-12-2009, 01:17 PM	#8
34natl Senior Member Join Date: Nov 2008 Posts: 142	Jerry, those look fantastic.Great job Mike