Scroll Saw Parts - Scroll Saw Woodworking & Crafts Message Board

Markopolo · 08-16-2009, 01:39 AM

Hello!

I'm new on the site and am looking for suggestions where I might find parts for an older Delta Rockwell 24" Scroll Saw. Specifically, I'm looking for the lower chuck and it's components. I'd appreciate any assistance anyone might provide. Thanks.

Sandy Oaks · 08-16-2009, 01:47 AM

Hi and welcome to the site. I can't help with the request, but I am sure someone will come along with some information. Lots of friendly people with good advise. Join in the fun and post some pictures of your work when possible.

Markopolo · 08-16-2009, 02:09 AM

Thanks for the welcome! I look forward to being a part of community and learning from others.

Chris "The Wood Artist" · 08-16-2009, 03:16 AM

Delta & Rockwell still produce saws so you may contact them or I'm sure you have some machine shops around your area, check with them. I know I had one that was really old, like 50yrs, and I looked online to no luck. Finally, one day driving down the road I saw a machine shop, so I stopped and asked and to my luck they located the parts I needed and ordered it. Cost me a lot but still able to get the parts. I fixed the saw and sold it, made money on it considering it didn't cost me anything for the saw other than the parts. Maybe you could also, check at some old antique type places and websites also. There is a site I've seen posted here and on other sites for older manuals and parts but can't think of it. Try searching for your particular manual and see if that helps. Hope you find resolve to your problem soon. I know the feeling not being able to locate something you need.

barny35 · 08-16-2009, 04:42 AM

Quote:

Originally Posted by Markopolo

Hello!

I'm new on the site and am looking for suggestions where I might find parts for an older Delta Rockwell 24" Scroll Saw. Specifically, I'm looking for the lower chuck and it's components. I'd appreciate any assistance anyone might provide. Thanks.

Might find parts here.

Old Wood-Working Machines (OWWM) - Welcome

JustMe1954 · 08-16-2009, 11:48 AM

DeWALT ServiceNET - Official Online Store for DeWALT, Porter Cable, Delta, and Black and Decker Parts

Kepy · 08-16-2009, 11:50 AM

You can quite often find parts on eBay.

Mick Walker · 08-16-2009, 04:37 PM

barny35, welcome to the forum. Delta was bought out by Black & Decker and no longer makes scrollsaws. You can try at these 2 places, they carry some Delta parts. Tool Parts Direct . com - The Online Tool Repair Parts Store and eReplacementParts.com : Power Tool Parts and Tool Repair
Good luck.

08-16-2009, 01:39 AM	#1
Markopolo Junior Member Join Date: Aug 2009 Posts: 2	Scroll Saw Parts Hello! I'm new on the site and am looking for suggestions where I might find parts for an older Delta Rockwell 24" Scroll Saw. Specifically, I'm looking for the lower chuck and it's components. I'd appreciate any assistance anyone might provide. Thanks.

08-16-2009, 01:47 AM	#2
Sandy Oaks Senior Member Join Date: Sep 2008 Location: Tennessee Posts: 1,244	Hi and welcome to the site. I can't help with the request, but I am sure someone will come along with some information. Lots of friendly people with good advise. Join in the fun and post some pictures of your work when possible. __________________ Denny www.sandyoaksonline.com

08-16-2009, 02:09 AM	#3
Markopolo Junior Member Join Date: Aug 2009 Posts: 2	Thanks Thanks for the welcome! I look forward to being a part of community and learning from others.

08-16-2009, 03:16 AM	#4
Chris "The Wood Artist" Craftsman & Designer Join Date: Aug 2009 Location: Fort Smith, AR USA Posts: 260	Delta & Rockwell still produce saws so you may contact them or I'm sure you have some machine shops around your area, check with them. I know I had one that was really old, like 50yrs, and I looked online to no luck. Finally, one day driving down the road I saw a machine shop, so I stopped and asked and to my luck they located the parts I needed and ordered it. Cost me a lot but still able to get the parts. I fixed the saw and sold it, made money on it considering it didn't cost me anything for the saw other than the parts. Maybe you could also, check at some old antique type places and websites also. There is a site I've seen posted here and on other sites for older manuals and parts but can't think of it. Try searching for your particular manual and see if that helps. Hope you find resolve to your problem soon. I know the feeling not being able to locate something you need. __________________ Chris The Wood Artist "Keep Scrolling Along" Free Patterns: http://thewoodartist.blogspot.com/

08-16-2009, 04:37 PM	#8
Mick Walker Senior Member Join Date: Jan 2005 Location: Janesville, WI Posts: 1,493	barny35, welcome to the forum. Delta was bought out by Black & Decker and no longer makes scrollsaws. You can try at these 2 places, they carry some Delta parts. Tool Parts Direct . com - The Online Tool Repair Parts Store and eReplacementParts.com : Power Tool Parts and Tool Repair Good luck. __________________ Mick, - Delta P-20 The future ain't what it used to be.

08-16-2009, 11:48 AM	#6
JustMe1954 Member Join Date: Mar 2008 Location: Phx AZ Posts: 80	DeWALT ServiceNET - Official Online Store for DeWALT, Porter Cable, Delta, and Black and Decker Parts

08-16-2009, 11:50 AM	#7
Kepy Senior Member Join Date: Feb 2004 Location: Elkland, MO Posts: 173	You can quite often find parts on eBay.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode