need 6" pinned scroll saw blades - Scroll Saw Woodworking & Crafts Message Board

deano22 · 07-03-2007, 01:03 AM

does anyone know of a source? recently obtained a craftsman scroll saw that takes this blade, sears doesn't have them and can't find any at any of sources i have checked. guess this is my last resort. thanks Dean

CanadianScroller · 07-03-2007, 03:16 AM

Most scrollsaw blades are 5" between the pins.
Coping saw blades are longer I am not sure if they are 6" or 6.5
You might try mini hacksaw blades too. They are longer than 5"
If this doesn't work you may need to retrofit that saw with new blade clamps.

Tor · 07-03-2007, 05:29 AM

Sloan's sells some 6" blades as I recall. Their website is www.sloanswoodshop.com . Good Luck.

Tor

muzzleloader · 07-03-2007, 11:06 PM

Yep, Sloans sells Olson pinless blades. See if you can get a pinless conversion kit that will fit your saw. Sears has one for about $25.00, but check with them to see if it will fit your model.
Hope this helps.
Brian

07-03-2007, 01:03 AM	#1
deano22 Junior Member Join Date: Jul 2007 Posts: 1	need 6" pinned scroll saw blades does anyone know of a source? recently obtained a craftsman scroll saw that takes this blade, sears doesn't have them and can't find any at any of sources i have checked. guess this is my last resort. thanks Dean

07-03-2007, 03:16 AM	#2
CanadianScroller Moderator CUT IT OUT Join Date: Feb 2005 Location: Chilliwack British Columbia, Canada Posts: 3,904 Blog Entries: 12	Most scrollsaw blades are 5" between the pins. Coping saw blades are longer I am not sure if they are 6" or 6.5 You might try mini hacksaw blades too. They are longer than 5" If this doesn't work you may need to retrofit that saw with new blade clamps. __________________ CAЯL HIRD-RUTTEЯ "proud member of the best scroll sawing forum on the net." Ryobi SC180VS scroll saw EX21

07-03-2007, 05:29 AM	#3
Tor Mad Marqueteur Join Date: May 2007 Location: The "Green Side" in Hawaii Posts: 1,416	Sloan's sells some 6" blades as I recall. Their website is www.sloanswoodshop.com . Good Luck. Tor __________________ I would rather be exposed to the inconveniences attending too much liberty than to those attending too small a degree of it. - Thomas Jefferson Garden Island Marqueteur http://www.fineartmarquetry.com

07-03-2007, 11:06 PM	#4
muzzleloader Senior Member Join Date: Jun 2007 Posts: 187	Yep, Sloans sells Olson pinless blades. See if you can get a pinless conversion kit that will fit your saw. Sears has one for about $25.00, but check with them to see if it will fit your model. Hope this helps. Brian __________________ muzzleloader "Scrolling through life, one kerf at a time."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hello from another scroll sawer "First Time"	CraigA	Beginners Scroll Saw	5	06-28-2007 01:11 AM
Pinned Scroll Saw Blades	Carver	Tools and Blades	10	01-08-2007 01:00 PM
"The Man in Black" scroll saw portrait.	kerry_nf	Fretwork and Portraits	5	11-14-2006 02:07 AM
plain or pinned blades?	Charlie_1	Tools and Blades	11	05-25-2006 02:06 AM
"Scroll portrait" finishing?	ontario026	General Scroll Saw	5	12-15-2005 12:15 AM