Four Projects - Scroll Saw Woodworking & Crafts Message Board

Karl Taylor · 10-07-2009, 04:54 AM

Four of recent projects. The Lords Prayer size is approx. 2' x 3', the horses I redrew from and detailed from a picture, the eagle is from "Segmentation" book and southwest scene designer is unknown.

The Lords Prayer sold i under an hour. Probably could have sold two more.

tony coleman · 10-07-2009, 09:23 AM

well done karl,i do like the lords prayer.how much did you sell it for.i made a couple years ago and sold them,but i found you could never realy charge
enough for the time you would put into making one.

Sally · 10-07-2009, 02:05 PM

Very nice work!

Karl Taylor · 10-07-2009, 03:21 PM

I could have sold them in the lower 4 digits. There is a story behing this project. I stack cut them 3 high. The first one I used 3/4 inch mahogany ply for the backer, which was way to heavy, but it looked good. I put the remaining pieces in a box on a shelf. 10 years later I found the box and completed the second piece (shown). I used 3/8 maple ply and stained for backer. Now the third is in a box in closet. I should finish it before the next ten years.

Wood Dog · 10-07-2009, 03:27 PM

You do some fine cutting Karl

wood-n-things · 10-07-2009, 04:13 PM

Nicely done. Glad you were able to figure out how to get those pictures posted..It was worth the wait...

saw dust · 10-09-2009, 12:42 AM

Nice work Karl. saw dust

Haggard3230 · 10-09-2009, 02:28 AM

Very nicely done Karl.

Anneh · 10-09-2009, 01:16 PM

Great job! Thanks for posting these. I love the Lord's Prayer! Fantastic!
Anne

10-07-2009, 09:23 AM	#2
tony coleman Senior Member Join Date: Sep 2008 Location: ireland Posts: 674	well done karl,i do like the lords prayer.how much did you sell it for.i made a couple years ago and sold them,but i found you could never realy charge enough for the time you would put into making one. __________________ lets make plenty of sawdust and have fun doing it http://www.customcutz4you.webs.com/

10-07-2009, 03:27 PM	#5
Wood Dog Senior member--Absolutely Join Date: Jul 2007 Location: MA USA Posts: 3,451	You do some fine cutting Karl __________________ WD

10-07-2009, 04:13 PM	#6
wood-n-things Behave Yourself..I can't. Join Date: Nov 2005 Location: Right here ---silly Posts: 4,478 Blog Entries: 1	Nicely done. Glad you were able to figure out how to get those pictures posted..It was worth the wait... __________________ The Mike One of them anyway. Don't be so open-minded. Your brains will fall out!

10-09-2009, 02:28 AM	#8
Haggard3230 Senior Member Join Date: Mar 2007 Location: Riverton, KS on Route 66 Posts: 2,714	Very nicely done Karl. __________________ Merle SSG US Army Retired. merlehobbs@yahoo.com

10-09-2009, 01:16 PM	#9
Anneh Senior Member Join Date: Jan 2009 Posts: 365	Great job! Thanks for posting these. I love the Lord's Prayer! Fantastic! Anne __________________ Anneh

10-07-2009, 02:05 PM	#3
Sally Senior Member Join Date: Nov 2008 Location: Renton WA Posts: 1,027	Very nice work!

10-07-2009, 03:21 PM	#4
Karl Taylor Junior Member Join Date: Dec 2008 Posts: 16	I could have sold them in the lower 4 digits. There is a story behing this project. I stack cut them 3 high. The first one I used 3/4 inch mahogany ply for the backer, which was way to heavy, but it looked good. I put the remaining pieces in a box on a shelf. 10 years later I found the box and completed the second piece (shown). I used 3/8 maple ply and stained for backer. Now the third is in a box in closet. I should finish it before the next ten years.

10-09-2009, 12:42 AM	#7
saw dust Senior Member Join Date: May 2009 Location: Michigan Posts: 626	Nice work Karl. saw dust

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode