Looking pattern by Kevin Daily - Scroll Saw Woodworking & Crafts Message Board

mowerman1193 · 01-21-2009, 01:39 PM

Well in another discussion I said I would post the cutting for Kevin. I wasn't sure where to post it at so here it is Kevin.

This was cut from 1/8" x 8.5" x 11" Red Oak and of course it is not finished yet as I have yet found a frame I like for it..Was wanting to make my own but I never done it before and this is to be raffled for a fund raiser for my daughters school field trip to Mackinac Island this spring..It is to be on display for a few weeks starting on the 30th..So with my limited time and all I will just buy a frame or maybe have one made at Hobby Lobby.. I am not sure how to post an image so if its not in my post then they are in my gallery or on this link

Looking - Scroll Saw Woodworking & Crafts Photo Gallery

Thanks,
Kevin

Jediscroller · 01-21-2009, 01:45 PM

Wow! You really brought that to life Kevin. Seeing this cut makes me wanna get back at doing some more patterns. Thanks sooo much for posting it. You really made my day.
Best of luck with the auction, hope it brings in millions, hehehe.

dragyn · 01-21-2009, 02:03 PM

Woah, that is great work! I mean that to both Kevin's, the pattern and the scrolling.

I see that one as a week long project for me. With all of the tiny inside cuts, I would have to take many breaks because of my eyes going cross-eyed!

Jr_Ranger · 01-21-2009, 02:08 PM

Kevin,
That turned out great! Hope that brings bunches of $$ for your daughters trip. Thanks for sharing. The link worked perfect.

mowerman1193 · 01-21-2009, 06:45 PM

Thanks Everyone for the kind words..The congrats really should go to Kevin Daily for making such a great pattern..all I did was cut and try to follow the lines, LOL..I sent the picture to the teacher and this is the reply back:
--------------------------------------------------------------------------------
"This is absolutely beautiful! You have a very impressive talent! I forwarded this onto the entire staff and will show the kids too!"
--------------------------------------------------------------------------------

That made me feel pretty good..I have never made anything for anyone outside the family before and to hear someone else say these kind of thing made me have to pat Kevin Daily and myself on the back..

I am actually cutting another one from Kevin Daily ( Jesus Falling Beneath the Cross ) right now..This one is giving me a tougher time..If I get this one done in time I may put one of the copies in the raffle as well..

Also, Kevin I hope you do get back to making some more patterns..though I still have some patterns of yours I want to cut yet..But you sure do some great work!

.

Thanks,
Kevin

Big_red_S · 01-21-2009, 07:41 PM

Looking...good

Sorry, had to do it.

Haggard3230 · 01-22-2009, 12:47 AM

Great job both Kevins.
Merle

marshall · 01-22-2009, 02:28 AM

Niece job Kevin .....

.......Marshall

lucky788scroller · 01-22-2009, 02:55 AM

great pattern, and excellent use of that pattern!

Dragon · 01-22-2009, 03:54 PM

Ok, I must be missing something. I only see a large red X
Diane

01-21-2009, 01:39 PM	#1
mowerman1193 Senior Member Join Date: Dec 2007 Location: Bellevue Michigan Posts: 275	Looking pattern by Kevin Daily Well in another discussion I said I would post the cutting for Kevin. I wasn't sure where to post it at so here it is Kevin. This was cut from 1/8" x 8.5" x 11" Red Oak and of course it is not finished yet as I have yet found a frame I like for it..Was wanting to make my own but I never done it before and this is to be raffled for a fund raiser for my daughters school field trip to Mackinac Island this spring..It is to be on display for a few weeks starting on the 30th..So with my limited time and all I will just buy a frame or maybe have one made at Hobby Lobby.. I am not sure how to post an image so if its not in my post then they are in my gallery or on this link Looking - Scroll Saw Woodworking & Crafts Photo Gallery Thanks, Kevin __________________ mowerman1193

01-21-2009, 01:45 PM	#2
Jediscroller American Crafstman Join Date: Jul 2005 Location: Galaxy far, far away Posts: 3,163 Blog Entries: 6	Wow! You really brought that to life Kevin. Seeing this cut makes me wanna get back at doing some more patterns. Thanks sooo much for posting it. You really made my day. Best of luck with the auction, hope it brings in millions, hehehe. __________________ Kevin Scrollsaw Patterns Online Making holes in wood with an EX-30, Craftsman 16" VS, Dremel 1680 and 1671

01-21-2009, 02:03 PM	#3
dragyn Local Goofball! Join Date: Jan 2009 Posts: 2,011	Woah, that is great work! I mean that to both Kevin's, the pattern and the scrolling. I see that one as a week long project for me. With all of the tiny inside cuts, I would have to take many breaks because of my eyes going cross-eyed! __________________ Dragyn (Oh my! Another Mike! ) It's a good thing my head is attached to my ... ... Has anyone seen my head?!? Last edited by dragyn; 02-18-2009 at 03:52 PM.

01-21-2009, 02:08 PM	#4
Jr_Ranger Moderator Join Date: Jul 2006 Location: Texas Posts: 861	Kevin, That turned out great! Hope that brings bunches of $$ for your daughters trip. Thanks for sharing. The link worked perfect. __________________ Sylvia Support Our Troops

01-21-2009, 06:45 PM	#5
mowerman1193 Senior Member Join Date: Dec 2007 Location: Bellevue Michigan Posts: 275	Thanks Everyone for the kind words..The congrats really should go to Kevin Daily for making such a great pattern..all I did was cut and try to follow the lines, LOL..I sent the picture to the teacher and this is the reply back: -------------------------------------------------------------------------------- "This is absolutely beautiful! You have a very impressive talent! I forwarded this onto the entire staff and will show the kids too!" -------------------------------------------------------------------------------- That made me feel pretty good..I have never made anything for anyone outside the family before and to hear someone else say these kind of thing made me have to pat Kevin Daily and myself on the back.. I am actually cutting another one from Kevin Daily ( Jesus Falling Beneath the Cross ) right now..This one is giving me a tougher time..If I get this one done in time I may put one of the copies in the raffle as well.. Also, Kevin I hope you do get back to making some more patterns..though I still have some patterns of yours I want to cut yet..But you sure do some great work! . Thanks, Kevin __________________ mowerman1193

01-21-2009, 07:41 PM	#6
Big_red_S Senior Member Join Date: May 2008 Location: The People's Republic of New Jesey Posts: 881	Looking...good Sorry, had to do it. __________________ Zohar - probably the only one. Living well is the best revenge Visit my gallery

01-22-2009, 12:47 AM	#7
Haggard3230 Senior Member Join Date: Mar 2007 Location: Riverton, KS on Route 66 Posts: 3,561	Great job both Kevins. Merle

01-22-2009, 02:28 AM	#8
marshall Just love Being Here Join Date: May 2008 Location: Jonesboro Arkansas { USA } Posts: 2,653	Niece job Kevin ............Marshall __________________ Usually busier than a cat in a sandbox !!!!!!!!!!! { Dewalt 788 only }

01-22-2009, 02:55 AM	#9
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,354	great pattern, and excellent use of that pattern! __________________ Dale w/ yella saws

01-22-2009, 03:54 PM	#10
Dragon scroller and moderator Join Date: Dec 2006 Location: Chertsey, Quebec, Canada Posts: 2,529	Ok, I must be missing something. I only see a large red X Diane __________________ Dragon Owner of a Dewalt 788 PuffityDragon on AFSP

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode