Vault Maintenance (Finally!) - Scroll Saw Woodworking & Crafts Message Board

Jediscroller · 01-13-2009, 03:32 PM

OK, I admit I've slacked off the past month. Over the next few days I want to start moving patterns from the new pattern posts into the vault. I just would like to confirm that it's ok with folks to do it. I've already gotten ok's from BubbanTenn and Andy (I think) for one he posted here. If you could either just drop me a PM or post a short reply here I can get started.

Thanks,

Okie_Arkie_Wood_Cutter · 01-13-2009, 07:24 PM

If you want to move any of mine to the vault, feel free to do so. I have not been to active in the past few months.

shadylady0447 · 01-13-2009, 08:55 PM

That would be OK with me Kevin. You might want to check the requested patterns also for anything that not a personal picture. I know I did a couple but don't remember if I posted them in new patterns also.

clayton717 · 01-14-2009, 12:28 AM

If there are any of mine feel free to move them.

tstagman · 01-14-2009, 01:05 AM

I've only posted a few but feel free to use them.

Ellenburg48 · 01-14-2009, 01:07 AM

Any patterns I post here can be moved to the vault. I posted them to share. Thanks for all your hard work.
Christina

ansarha · 01-14-2009, 01:39 PM

When I do post- you are welcome to vault them. They are for sharing

Welcome back- hope you had a wonderful holiday with your family

koehler788 · 01-16-2009, 12:39 AM

Kevin,

I give you my blessing to move any patterns, any way you wish.
I haven't made too many yet because I am still wandering this site, and scrolling in my basement.

!!

woodworker001 · 03-16-2009, 03:29 AM

As soon as I figure out how to put them on this site you are welcome to do what ever you want with them. I post for anyone that wants to use them. Judy woodworker001

Fremmed · 03-16-2009, 05:15 AM

Mine, Mine, Mine. They're all mine, you can't touch a single one of them.

Excuse me. That must have been Mr. Hyde

Any pattern that I post is always welcome to all!

01-13-2009, 03:32 PM	#1
Jediscroller American Crafstman Join Date: Jul 2005 Location: Galaxy far, far away Posts: 3,174 Blog Entries: 5	Vault Maintenance (Finally!) OK, I admit I've slacked off the past month. Over the next few days I want to start moving patterns from the new pattern posts into the vault. I just would like to confirm that it's ok with folks to do it. I've already gotten ok's from BubbanTenn and Andy (I think) for one he posted here. If you could either just drop me a PM or post a short reply here I can get started. Thanks, __________________ Kevin Scrollsaw Patterns Online Making holes in wood with an EX-30, Craftsman 16" VS, Dremel 1680 and 1671

01-13-2009, 07:24 PM	#2
Okie_Arkie_Wood_Cutter Senior Member Join Date: May 2006 Location: SouthWest Arkansas Posts: 402	If you want to move any of mine to the vault, feel free to do so. I have not been to active in the past few months. __________________ You can take the boy out of the hill country, but you can not take the hill country out of the boy. Okie's Cuttings and Patterns http://s210.photobucket.com/albums/bb24/okiearkie/ darrell, the okiearkie

01-13-2009, 08:55 PM	#3
shadylady0447 Senior Member Join Date: Nov 2008 Location: Southwest Washington Posts: 554	That would be OK with me Kevin. You might want to check the requested patterns also for anything that not a personal picture. I know I did a couple but don't remember if I posted them in new patterns also. __________________ Sue http://s697.photobucket.com/albums/vv340/shadylady0447/

01-14-2009, 12:28 AM	#4
clayton717 Senior Member Join Date: Nov 2008 Location: N.W OHIO Posts: 133	If there are any of mine feel free to move them. __________________ Clayton

01-14-2009, 01:05 AM	#5
tstagman Senior Member Join Date: Nov 2008 Location: Kentucky Posts: 810	I've only posted a few but feel free to use them. __________________ Terry http://www.scrollsawer.com/gallery/s...0/ppuser/12859 The Hurrier I go, the Behinder I get!!

01-14-2009, 01:07 AM	#6
Ellenburg48 Senior Member Join Date: Jul 2008 Location: Jennings, OK Posts: 448	Any patterns I post here can be moved to the vault. I posted them to share. Thanks for all your hard work. Christina __________________ May all your days be filled with sunshine, happiness, laughter and much love.

01-14-2009, 01:39 PM	#7
ansarha Happiest making sawdust.. Join Date: Sep 2007 Location: Beautiful place of earth... Posts: 135	When I do post- you are welcome to vault them. They are for sharing Welcome back- hope you had a wonderful holiday with your family __________________ ~Nikki

01-16-2009, 12:39 AM	#8
koehler788 Portraits In Wood By Paul Join Date: Nov 2008 Location: Beech Grove, In Posts: 198	Kevin, I give you my blessing to move any patterns, any way you wish. I haven't made too many yet because I am still wandering this site, and scrolling in my basement. !! __________________ Paul http://www.scrollsawer.com/gallery/s...ry.php/cat/691 nwcchmpfn17@sbcglobal.net

03-16-2009, 03:29 AM	#9
woodworker001 Junior Member Join Date: Nov 2008 Location: ocala florida Posts: 20	post mine As soon as I figure out how to put them on this site you are welcome to do what ever you want with them. I post for anyone that wants to use them. Judy woodworker001

03-16-2009, 05:15 AM	#10
Fremmed Senior Member Join Date: Jan 2008 Location: Rancho Cucamonga, CA Posts: 840	Mine, Mine, Mine. They're all mine, you can't touch a single one of them. Excuse me. That must have been Mr. Hyde Any pattern that I post is always welcome to all! __________________ The Journey is the Reward Kevin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode