It's DONE!!!!!! - Scroll Saw Woodworking & Crafts Message Board

Jediscroller · 11-19-2008, 11:39 PM

If my count was correct, 1099 patterns later, the new vault is now done! My heartfelt thanks to all of the designers who have so graciously allowed us to bring their patterns with us to our new home. If you had patterns in the vault and don't see them here, please contact me via either PM or e-mail (kevinpdaly@yahoo.com). It's possible I missed them or that I didn't receive your permission.
I've also added a separate thread for navigating the vault with hyperlinks for each section as I thought it might make it a little quicker for folks.

One last note, if you see a pattern that you suspect is an infringement of someone's copyright, please contact me privately so that I can look into it. Any infringing patterns will be immediately removed. There are many instances where patterns may look similar due to a common image being used and it can cause hard feelings when folks are accused of wrong-doing when none was done.

Thank you,

Arcy · 11-19-2008, 11:49 PM

1099 patterns to cut in the vault
1099 patterns to cut
Print one out
Cut it without fault
1098 patterns to cut in the vault

Thanks Kevin!

--Rob

Sandy Oaks · 11-20-2008, 12:14 AM

LOL Rob,

Cutting all 1099 patterns would be like trying to read all the posts in this forum. Impossible.

Denny

shadylady0447 · 11-20-2008, 12:16 AM

Way to go, Kevin!!! That was a monumental job and you deserve a big pat on the back and a beer! Now that song is stuck in my head, Rob! LOL
Thanks, Kevin!

sawduster 81 · 11-20-2008, 01:14 AM

THANKS KEVIN,
Nice to see the patterns grouped as thumbnails also....coooooool,
Bob

druidman82 · 11-20-2008, 02:20 AM

Hey Kevin don't forget to put any of my patterns in. If you still have them.

Ocelot · 11-20-2008, 02:37 AM

Thank you, Kevin! That must've been a huge amount of work and it's much appreciated.

newbeescroller · 11-20-2008, 04:05 AM

This was a great help for me as a beginner. Thanks so much.

David S.

Okie_Arkie_Wood_Cutter · 11-20-2008, 04:28 AM

Hey Kevin, good job on the pattern vault and thanks for all of your hard work. Sorry Sylvia, but you just have to brag 'em ever now and then LOL

No kidding we, all of us appreciate your efforts on our behalf.

Jr_Ranger · 11-20-2008, 04:30 AM

Yep he done good, but don't say it too loud, the Macy day parade is near lol.

11-19-2008, 11:39 PM	#1
Jediscroller American Crafstman Join Date: Jul 2005 Location: Galaxy far, far away Posts: 3,174 Blog Entries: 5	It's DONE!!!!!! If my count was correct, 1099 patterns later, the new vault is now done! My heartfelt thanks to all of the designers who have so graciously allowed us to bring their patterns with us to our new home. If you had patterns in the vault and don't see them here, please contact me via either PM or e-mail (kevinpdaly@yahoo.com). It's possible I missed them or that I didn't receive your permission. I've also added a separate thread for navigating the vault with hyperlinks for each section as I thought it might make it a little quicker for folks. One last note, if you see a pattern that you suspect is an infringement of someone's copyright, please contact me privately so that I can look into it. Any infringing patterns will be immediately removed. There are many instances where patterns may look similar due to a common image being used and it can cause hard feelings when folks are accused of wrong-doing when none was done. Thank you, __________________ Kevin Scrollsaw Patterns Online Making holes in wood with an EX-30, Craftsman 16" VS, Dremel 1680 and 1671

11-20-2008, 12:16 AM	#4
shadylady0447 Senior Member Join Date: Nov 2008 Location: Southwest Washington Posts: 554	Way to go, Kevin!!! That was a monumental job and you deserve a big pat on the back and a beer! Now that song is stuck in my head, Rob! LOL Thanks, Kevin! __________________ Sue http://s697.photobucket.com/albums/vv340/shadylady0447/

11-20-2008, 02:20 AM	#6
druidman82 Junior Member Join Date: Nov 2008 Posts: 3	Don't forget me Hey Kevin don't forget to put any of my patterns in. If you still have them.

11-20-2008, 04:28 AM	#9
Okie_Arkie_Wood_Cutter Senior Member Join Date: May 2006 Location: SouthWest Arkansas Posts: 402	Hey Kevin, good job on the pattern vault and thanks for all of your hard work. Sorry Sylvia, but you just have to brag 'em ever now and then LOL No kidding we, all of us appreciate your efforts on our behalf. __________________ You can take the boy out of the hill country, but you can not take the hill country out of the boy. Okie's Cuttings and Patterns http://s210.photobucket.com/albums/bb24/okiearkie/ darrell, the okiearkie

11-20-2008, 04:30 AM	#10
Jr_Ranger Moderator Join Date: Jul 2006 Location: Texas Posts: 869	Yep he done good, but don't say it too loud, the Macy day parade is near lol. __________________ Sylvia Support Our Troops

11-19-2008, 11:49 PM	#2
Arcy Senior Member Join Date: Jun 2008 Location: Seattle(ish) Posts: 772	1099 patterns to cut in the vault 1099 patterns to cut Print one out Cut it without fault 1098 patterns to cut in the vault Thanks Kevin! --Rob

11-20-2008, 12:14 AM	#3
Sandy Oaks Senior Member Join Date: Sep 2008 Location: Tennessee Posts: 1,248	LOL Rob, Cutting all 1099 patterns would be like trying to read all the posts in this forum. Impossible. Denny

11-20-2008, 01:14 AM	#5
sawduster 81 Member Join Date: Nov 2008 Location: AZ Posts: 51	THANKS KEVIN, Nice to see the patterns grouped as thumbnails also....coooooool, Bob

11-20-2008, 02:37 AM	#7
Ocelot Senior Member Join Date: Sep 2008 Location: NY Posts: 487	Thank you, Kevin! That must've been a huge amount of work and it's much appreciated.

11-20-2008, 04:05 AM	#8
newbeescroller Senior Member Join Date: Nov 2008 Location: Nebraska Posts: 171	This was a great help for me as a beginner. Thanks so much. David S.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode