Intarsia

[dale]

I know that Jim Rodman just had a post about Intarsia..
But I have never even heard of it till I came to this sight about 3 months ago. I am interested in trying my hand as it. But really dont know where to start.
What would be a good starter Pattern?
What thickness of wood do you usually do it with?
Is there a good instuction web page that you know of?

that should be enough questions to start off with

thanks
dale

[Cutting Cathy]

Hi Dale, Even tho I don't do intarsia, I have a site that has a fantastic tutorial!! I've had it bookmarked for quite awhile now just in case I get the courage to actually try it!! There are 2 "Intarsia E-Book" listed on the left hand side. Check them both out. They include the pattern for the teddy bear in the first e-book. Who knows maybe you can inspire me to get started with it!! http://intarsia.net/

Cathy in NE

[PuzzledMoose]

Another I looked at recently - and I'm another who doesn't do intarsia ...has a free dolphin plan with very few pieces ...http://www.fantasticwoodworking.com/...e_intarsia.php

[Trout]

you want to try Intarsia?
the next thing you know, your going to need more tools...
there's nothing to it, all you have to do is cut, shape, file and sand...that's it....



as soon as the last couple pieces get out of the fuming tank I can start assembly...
this is going to be a record, this project only took 4 day's..

Sorry this post hasn't been much help to you other than to show you what your in for..

Trout

[Magpie]

I'm a recent intarsia addict. I have mostly used 3/4 inch thick boards (usually 1x6 from the lumber yard); just about any kind of wood will do. You can use patterns from coloring books, kids' drawings, just about anything-just draw something up to practice with! I am having fun with the illustrations from Alice in Wonderland and the Wizard of Oz right now.

You might like to try Judy Gale Roberts' Intarsia Workbook--I have found it extremely helpful in learning how to use shims and sand and so forth. If you look on intarsia.com you will find some helpful information. Here http://www.freeintarsiapatterns.com/ is a site I like to drool on a lot. Hope that helps!

[Dragon]

Thank you all for this information. I am doing a lot of reading and intarsia is a possibility in the future so I bookmark all these sites and will probably try my hand at it later this year.

[workin for wood]

Takes some careful planning, but not really that many tools. Be sure to have an electric pencil sharpener, carbon paper and lots of masking tape. I don't recommend cutting and gluing pattern pieces on to wood because they never fit back together. I use 3/4 to one inch thick woods and a #9 skip tooth blade. I use a cut and trace method. You cut a piece and then you use the cut piece/combined with the pattern to trace out the next piece. For example..you cut out an eyeball. You take the board that is to be the face/head and put the carbon paper and pattern on it. You set the cut out eyeball on the pattern where it belongs and you trace the eye and then the head. You keep tracing and matching pieces...taping them tight together as you go. It's easier if you use all the same thicknesses of course.
A judy gale teddybear or dolphin is certainly a good starter choice.

[dale]

Ok Trout you got me on that one.. What is a fuming tank? and what is it used for ?

dale

[sstalker]

Hi all and happy holidays.

One source of patterns for intarsia is stained glass patterns. A lot of the same construction principles apply. www.spectrumglass.com has quite a few, although only the pdf (which is most of them) files would be of value unless you have a program called Glasseye.

When I finish all the fretwork I have patterns for, I will try an intarsia project.

Steve - Toledo

[ChuckD]

One problem with intarsia. If you start it, you are in trouble. You will be addicted. You will come to love sanding. You will look at pictures and say"I can make an intarsia out of that". So just be careful.