putting things together - Scroll Saw Woodworking & Crafts Message Board

Brenda · 11-03-2005, 12:53 AM

Hi i was wundering if some could please tell me how to putt things together after making them ... do u just glue them or use small nails

Woodbutcher68 · 11-03-2005, 01:27 AM

It depends on the size of the project. Smaller projects could be glued using a good wood glue or CA (Crazy glue). Larger items could be fastened using glue, brads or a combination of the two. Do not use a polyurethane glue such as Gorilla Glue unless you want to spend a lot of time cleaning it up.

Brenda · 11-03-2005, 03:36 AM

thank you very much

jttheclockman · 11-03-2005, 04:05 AM

Brenda

Glad to see you asking questions here and you will get alot of good advice for sure but may I make a request, when asking a question if you can be more specific it would be a great asset to us. This way we can help more directly. That is such a broad question. There are many options not only glue and nails. It depends on the project and what you are looking to do. But for gluing woods together there is in my opinion no better glue than yellow carpenters glue such as Titebond glue. Many people in the scrolling industry like to use Aileens Tacky glue that comes in the brown bottle and can be found at any craft store or Walmarts. I have used this in the past especially when the piece had to be stained first before assembly. Holds real well. As far as brads or nail it has to be a piece tht can withstand the pounding of a hammer or if you can use an airnailer would be better. But for most part things are glued. Have a good day and please keep the questions coming.

Brenda · 11-07-2005, 02:07 AM

Thank you very much John T I am making my first clock with my own pattern and I wasn't sure on how to put thie sides on the front and back
if any one would like to see my pattern please ask....

jttheclockman · 11-07-2005, 03:12 AM

Brenda

Pictures are always worth a thousand words. Would love to see it.

lucky788scroller · 11-09-2005, 03:22 AM

I too would love to see your work. Im also finishing up a clock I "tried "designing.I may have pictures soon. I usually assemble with glue only,and ocasionaly a couple small nails where they wont be seen.When possible,I drill a teeny weeny hole where the nail or brad is to be driven to prevent the wood from splitting .JT is right,save the poly glue for other things.I use a lot of ailenes tacky glue,and never had a problem with it. This last clock I glued up,I used yellow woodworkers glue from one of those penlike glue bottles they sell.I even cheated and refilled one with titebondII when it got empty.It seems to hold good,its at least as strong as the wood itself.Good luck,Ill look forward to seeing it!

Brenda · 11-10-2005, 12:54 AM

hi everyone my first clock pattern is in the beginners picture gallery

jttheclockman · 11-10-2005, 03:30 AM

Brenda

Thanks for posting the pictures. Now first let me say you are doing a good job designing the clock. I am not quite sure what I am looking at but from the pictures I need clarification. The design with the scrolls are they going to be an overlay on top of a solid piece of wood??

The reason I ask is there is no wood on the sides or tops or bottoms so to glue together. You would need at least a 1/4" boarder around it to be able to glue together. Also if you are making this a pendulum clock make sure there is enough room for the pendulum to swing and deep enough to allow for the motor. Keep up the good work and hope to see a working clock soon.

Brenda · 11-11-2005, 01:44 AM

there will be sides when i am finished with it and som e of the work will be overlayed its hard for me to put everything on paper but i have a great pic in my mind I did mess up on the size it going to be closer to 2 ft instead of 3. i will gladly send pictures when it is completed thanks Brenda