buying music box parts - Scroll Saw Woodworking & Crafts Message Board

plainnotpinned · 09-09-2009, 01:55 AM

I was wondering where to buy music box parts, anybody have a good site? Additionally is there an easy way to hang hinges???? I have had a bit of trouble with them, seem to move when you look away

). I would really appreciate any help.

lucky788scroller · 09-09-2009, 02:18 AM

I sometimes use double sided tape to hold them in position while I drill the screwholes. Then remove the tape and install.On occasion, I have even glued them in place and drilled and installed screws after the glue dries. CA glue works for this as long as you treat it carefully after gluing. Music box parts... Klockit - The World's Leading Clock Parts and Clock Movements Supplier for Over 35 Years or Woodworking & Wood Craft Products - Wooden Shaker Pegs, Balls, Toy Wheels would be my first places to look, followed by Ceramic Supplies, Craft, Gift and Hobby Supplies - National Artcraft.

unixpro · 09-09-2009, 05:22 PM

Second for both Klockit and the tape.

When you drive the screws, it's very helpful to use some screw lube. It really makes things easier.

09-09-2009, 01:55 AM	#1
plainnotpinned teenage scroller Join Date: Apr 2009 Location: oklahoma Posts: 48	buying music box parts I was wondering where to buy music box parts, anybody have a good site? Additionally is there an easy way to hang hinges???? I have had a bit of trouble with them, seem to move when you look away). I would really appreciate any help. __________________ Joe

09-09-2009, 02:18 AM	#2
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,260	I sometimes use double sided tape to hold them in position while I drill the screwholes. Then remove the tape and install.On occasion, I have even glued them in place and drilled and installed screws after the glue dries. CA glue works for this as long as you treat it carefully after gluing. Music box parts... Klockit - The World's Leading Clock Parts and Clock Movements Supplier for Over 35 Years or Woodworking & Wood Craft Products - Wooden Shaker Pegs, Balls, Toy Wheels would be my first places to look, followed by Ceramic Supplies, Craft, Gift and Hobby Supplies - National Artcraft. __________________ Dale w/ yella saws

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-09-2009, 05:22 PM	#3
unixpro I need more weekend Join Date: Dec 2006 Location: Greater Seattle Area Posts: 615	Second for both Klockit and the tape. When you drive the screws, it's very helpful to use some screw lube. It really makes things easier.