Don't give up! - Scroll Saw Woodworking & Crafts Message Board

florintina2001 · 02-02-2009, 07:46 PM

I saw a post here where someone says "I give up". Lives in a blessed country and in terms of the scroll saw. Do not ever say that, when you have all that to do well this hobby. I scroll with a manual fretwork, the only plywood factory from my country, was closed 2 days now, and producers do not find blades here.Don't give up, continue and will have great satisfactions.Visit my website: Traforaj

minowevie · 02-02-2009, 11:55 PM

Hi Florintina. I went to your sight. and wow. you sure have done some great scrool work. I have to complement you on your perserverance. sorry can't spell. but it sounds like your country doesn't give you the wood or blades offten. you can always move to the USA. we would welcome you hear. and thank you for the uplefting . we do love that. Evie

Jim McDonald · 02-03-2009, 12:09 AM

As Evie said, you do beautiful work and I truly appreciate all the work you have done.

Yes, we are blessed in this contry to have multiple sources of wood and affordable tools. Sometimes, I feel we take it for granted and that makes your determination more appreciated.

Please feel free to come back here and post often. I know there are a few hand sawers around here as well as those of us who move the wood and not the saw!

tstagman · 02-03-2009, 12:10 AM

WOW Floritina, that is some awesome work that you do. Thanks for sharing that with us. It gives us all the incentive to do more.

JohnB · 02-03-2009, 12:13 AM

G'day Florintina,
I had a look at your site and signed the guest book.
You have some beaut pieces on your site and leave many with powered saws in the dust.

lucky788scroller · 02-03-2009, 04:34 AM

Tina Florin,
On your site is what appears as a fretwork plate sort of plaque, which has a basket and a lot of floral fretwork .To me, that piece is so wonderful. Where can I find that pattern ? I would love to scroll that project! Amazingly Beautiful work!

catslover64 · 02-03-2009, 06:16 PM

Hi Florintina, I too went to your site. All I can say is, "WOW". I wish I could do things like that with my power scroll saw. Keep it up would love to see more. Way to go.
Sue

Stoney · 02-03-2009, 10:07 PM

Hello Florintina,

Welcome! I also visited your site and signed your guestbook. You have done some great looking work. Please come back soon. I would like to see some of your work posted here.

02-02-2009, 07:46 PM	#1
florintina2001 Junior Member Join Date: Dec 2005 Location: Romania Posts: 90	Don't give up! I saw a post here where someone says "I give up". Lives in a blessed country and in terms of the scroll saw. Do not ever say that, when you have all that to do well this hobby. I scroll with a manual fretwork, the only plywood factory from my country, was closed 2 days now, and producers do not find blades here.Don't give up, continue and will have great satisfactions.Visit my website: Traforaj

02-03-2009, 12:09 AM	#3
Jim McDonald Sawdust Maker Join Date: Jun 2008 Location: Muncie, IN USA Posts: 1,109 Blog Entries: 9	As Evie said, you do beautiful work and I truly appreciate all the work you have done. Yes, we are blessed in this contry to have multiple sources of wood and affordable tools. Sometimes, I feel we take it for granted and that makes your determination more appreciated. Please feel free to come back here and post often. I know there are a few hand sawers around here as well as those of us who move the wood and not the saw! __________________ Jim If it cannot be fixed with a hammer--must be an electrical problem. "Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end."

02-03-2009, 12:10 AM	#4
tstagman Senior Member Join Date: Nov 2008 Location: Kentucky Posts: 815	WOW Floritina, that is some awesome work that you do. Thanks for sharing that with us. It gives us all the incentive to do more. __________________ Terry http://www.scrollsawer.com/gallery/s...0/ppuser/12859 The Hurrier I go, the Behinder I get!!

02-03-2009, 12:13 AM	#5
JohnB 1 Tin Soldier Rides Away Join Date: Sep 2007 Location: Kalgoorlie, Western Australia Posts: 5,161	G'day Florintina, I had a look at your site and signed the guest book. You have some beaut pieces on your site and leave many with powered saws in the dust. __________________ Regards John "The Golden Mile" Clowns to the left of me, Jokers to the right, here I am, Stuck in the middle with you. Some of my Stuff Retired Medically Unfit WA Police Officers

02-03-2009, 04:34 AM	#6
lucky788scroller Senior Member Join Date: Sep 2005 Location: wisconsin Posts: 6,354	Tina Florin, On your site is what appears as a fretwork plate sort of plaque, which has a basket and a lot of floral fretwork .To me, that piece is so wonderful. Where can I find that pattern ? I would love to scroll that project! Amazingly Beautiful work! __________________ Dale w/ yella saws

02-02-2009, 11:55 PM	#2
minowevie Senior Member Join Date: Nov 2005 Location: california Posts: 6,297	Hi Florintina. I went to your sight. and wow. you sure have done some great scrool work. I have to complement you on your perserverance. sorry can't spell. but it sounds like your country doesn't give you the wood or blades offten. you can always move to the USA. we would welcome you hear. and thank you for the uplefting . we do love that. Evie

02-03-2009, 06:16 PM	#7
catslover64 Senior Member Join Date: Nov 2008 Location: York, PA Posts: 122	Hi Florintina, I too went to your site. All I can say is, "WOW". I wish I could do things like that with my power scroll saw. Keep it up would love to see more. Way to go. Sue

02-03-2009, 10:07 PM	#8
Stoney Senior Member Join Date: Feb 2008 Location: michigan Posts: 217	Hello Florintina, Welcome! I also visited your site and signed your guestbook. You have done some great looking work. Please come back soon. I would like to see some of your work posted here. __________________ Stoney aka Al Making dust with a Hegner 22v and a Delta P20

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode