Big Bear Carving - Scroll Saw Woodworking & Crafts Message Board

Rando · 09-14-2002, 01:31 PM

Awhile back there was a post on chainsaw carving. Well here is my attempt at a big carving. Can't post the pics, but check out this link. Sign my guess book, or let know what you think here. That site has had some problems staying up lately, so if it's down try back later.
Thanks
Rando

http://www.netsnapshot.com/pcw/b?KEY=2&ACCOUNT=5963

Rando · 09-14-2002, 01:34 PM

Check back in for more updates, and the finished carving.
Rando

pyrogite · 09-14-2002, 04:36 PM

Rando this is great!
I love 'in progress' photos! Great looking big bear! I can't wait to see it finished!

Donna

lorax · 09-16-2002, 11:09 AM

Rando
I was wondering what kind of saw that is, Jonsered 2171? when I was thinking of delving more into the magical world of saw carving, that was the saw I was looking into--great piece of equipment. You make it look easy Rando, you are truly the man!

Rando · 09-16-2002, 09:37 PM

Thanks for the compliments. I'll let you know when I get it completed. The saw I bought at Sears. It's a Poulan 41cc with an 18' bar, with the Crafstman name, about half the saw I really need to get through that stump. I'm looking at a smaller saw for the detail work, Sthil 017 with a 14' bar.

09-14-2002, 01:31 PM	#1
Rando Member Join Date: Dec 2001 Location: kansas city mo Posts: 79	Big Bear Carving Awhile back there was a post on chainsaw carving. Well here is my attempt at a big carving. Can't post the pics, but check out this link. Sign my guess book, or let know what you think here. That site has had some problems staying up lately, so if it's down try back later. Thanks Rando http://www.netsnapshot.com/pcw/b?KEY=2&ACCOUNT=5963 __________________ &&&&RANDO

09-14-2002, 01:34 PM	#2
Rando Member Join Date: Dec 2001 Location: kansas city mo Posts: 79	Re: Big Bear Carving Check back in for more updates, and the finished carving. Rando __________________ &&&&RANDO

09-14-2002, 04:36 PM	#3
pyrogite Senior Member Join Date: Jan 2002 Location: Indiana Posts: 146	Re: Big Bear Carving Rando this is great! I love 'in progress' photos! Great looking big bear! I can't wait to see it finished! Donna __________________ Indiana USA&&http://pyrogite.tripod.com

09-16-2002, 11:09 AM	#4
lorax Senior Member Join Date: Apr 2002 Location: Wayland MI Posts: 177	Re: Big Bear Carving Rando I was wondering what kind of saw that is, Jonsered 2171? when I was thinking of delving more into the magical world of saw carving, that was the saw I was looking into--great piece of equipment. You make it look easy Rando, you are truly the man! __________________ I Cut It Six Times And It's Still Too Short!!!

09-16-2002, 09:37 PM	#5
Rando Member Join Date: Dec 2001 Location: kansas city mo Posts: 79	Re: Big Bear Carving Thanks for the compliments. I'll let you know when I get it completed. The saw I bought at Sears. It's a Poulan 41cc with an 18' bar, with the Crafstman name, about half the saw I really need to get through that stump. I'm looking at a smaller saw for the detail work, Sthil 017 with a 14' bar. __________________ &&&&RANDO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bear cutting	kyscroller	Fretwork and Portraits	10	05-24-2007 09:16 PM
Carving pattern for a bear.	Gun	Animals and Birds Carving	10	10-19-2004 08:35 PM
BEAR CARVING, NOT BARE	hugh	General Carving	23	08-31-2004 02:02 AM
Big Bear Carving	Rando	Animals and Birds Carving	7	10-18-2002 10:21 PM
Bear Carving	gopher	Animals and Birds Carving	3	09-06-2002 04:52 AM