Scroll Saw Woodworking & Crafts: Reindeer Ornaments

Reindeer Ornaments
================================================================================
WyvernWench on 08/31/2009 16:24:00
 
The obvious uses for these patterns are ornaments or gift tag holders, but there
are a variety of other possibilities.
-Enlarge the pattern, cut it out of plywood, and add holiday lights as a window
decoration.
-Make the pattern very large, cut it out of exterior plywood, and place it in
your yard.
-Add supports to the back and put a candle behind it to cast interesting
shadows.
Step 1: Copy the pattern. Attach it to the wood, using your method of choice.
Step 2: Drill blade-entry holes. For the interior detail cuts, use a drill bit
just large enough to feed the #3 blade, or your blade of choice, through.
Step 3: Cut the inside fretwork. Use the #3 blade or your blade of choice.
Start in the center, and work our way out. Do the more delicate areas first.
Step 4: Cut the outline of the ornaments. Use a #5 blade or your blade of
choice.
Step 5: Sand off any rough edges or burrs left by the cutting.
Step 6: Apply your finish of choice. After the finish dries, spray the entire
project with clear lacquer.
MATERIALS:
*¼” x 4” x 5½” Hardwood or plywood of choice 	*Spray adhesive or
graphite paper (to transfer the pattern) 	*Assorted grits of sandpaper 	*Finish
of choice 	*Clear lacquer
TOOLS:
*#3 and #5 scroll saw blades or blades of choice 	*Drill 	*Assorted small drill
bits
Click the article attachment to download the patterns for this project.